Frequency Meter - Silca Easy Scan Plus Manual De Uso

Easy Scan Plus
Only in the case of Rolling Secure Learning remote
control
The user is required to send the source code for the remote
control to be copied; how to send it depends on the remote
control involved. Check with website www.silca.biz to see
which way is indicated for your remote control.
Only in the case of quartzed remote control
To make copy checking for quartzed remote controls more reliable and precise, we recommend using the
"Tuning Antenna" func on to read the intensity of the copied remote control signal.
When required, take the copied Silca remote control up to
the reading area (to make contact see fi gure 1) and press
any bu on on the remote control.
If the copied remote control is the same as the original,
Easy Scan Plus will show the message:
Otherwise:
Note:
This func on responds only with Silca remote controls.
If remote controls by another manufacturer are used, the
Easy Scan Plus display will show:

FREQUENCY METER:

Use the bu ons on the side of the display to select
"Frequency meter".
Press "ENTER" to con nue.
12 Copyright Silca S.p.A 2016
Copy check
Waiting for
SOURCE code
Wait Remote 433 MHz
(ESC) main menu
Identifi cation
Press the same key
on copied Remote
(ESC) main menu
Copy check
SUCCESSFUL copy
(ENT) to continue
Copy check
WRONG copy
not matching code
(ENT) to continue
Copy check
NOT SILCA REMOTE
Verify again?
(ESC) NO
Main menu
Identifi cation
Copy check
> Frequency meter
Antenna Tuning
Options
(ENT) to continue
English
433 MHz
433 MHz
433 MHz
(ENT) YES