Options Menu - Silca Easy Scan Plus Manual De Uso

Easy Scan Plus
Take the remote control to be read up to the reading area
(to make contact see fi g.1) and press any bu on on the
remote control.
Easy Scan Plus indicates the frequency and modula on of
the signal emi ed from the remote control.
ANTENNA TUNING:
Use the bu ons on the side of the display to select
"Antenna Tuning".
Press "ENTER" to con nue.
Open the remote control case (see remote control instruc-
ons).
Take the remote control up to the reading area (to make
contact see fi gure 1), hold down any bu on.
Use the ceramic screwdriver to slowly turn the antenna
adjus ng screw to achieve maximum band on the intensity
indicator on the display .
When the maximum value is reached, move the remote control a li le farther away and repeat the opera on
un l the maximum visible on the display is reached.
Close the remote control case.
This menu is used to access the following func ons:
- Language (see sec on Power on for setup/language
change).
- Read SW version on Silca remote controls
- Selec on of SILCA Remotes to show
- About Easy Scan Plus
READ SW VERSION ON SILCA REMOTE CONTROLS:
Take the Silca remote control up to the reading area and
press any bu on.

OPTIONS MENU

Copyright Silca S.p.A 2016
Frequency meter
AM
433.92 MHZ
Press remote button
(ESC) main menu
Main menu
Identifi cation
Copy check
Frequency meter
>Antenna Tuning
Options
(ENT) to conitnue
Antenna Tuning
0 | 50
Press remote button
(ESC) back
Options
> Language Selection
Silca Remote version
Select SILCA Remotes
Easy Scan Info
(ESC) Back
Silca Remote version
Press any key
on SILCA remote
(ESC) main menu
English
| 100
(ENT) Next
(ENT) Next
13