Silca Easy Scan Plus Manual De Uso página 10

Easy Scan Plus
If the remote control being read can be copied, the
Silca remote control (model and version) compatible
with copying is shown, together with a message that
the Rolling Secure Learning procedure must be used.
(The copying procedure depends on the remote
control to be copied.
Check with website www.silca.biz to see which one is
indicated for your remote control and see the instruc-
tions provided with the Silca remote control indicated
by Easy Scan Plus).
Press "ENTER" for the "Check Copy" func on.
When the copy has been made, take the Silca remote
control up to the reading area (to make contact see fi g. 1-C)
and press and release the same bu on as the one on the
copied remote control.
Keep the remote control near the reading area un l Easy
Scan Plus has fi nished the checking process.
When the copy has been made the remote control must be linked to the receiver. This opera on can be
performed by A.L.S. ( simplifi ed procedure to ac vate the remote control on the receiver. The list of receivers
compa ble with the procedure can be found on www.silca.biz.
chosen by the receiver manufacturer.
The possibility to use one procedure rather than another is indicated at the end of the copy check func on.
When the copy has been made successfully the display will show the following message:
The message "A.L.S. compa ble" indicates that the copied
remote control can be linked to the receiver by means of
the "A.L.S. procedure".
See the instruc ons for the Silca remote control indicated
by Easy Scan Plus and the website: www.silca.biz.
The message "OEM compa ble" indicates that the copied
remote control can be linked to the receiver only by means
of the procedure chosen by the receiver manufacturer.
See the documenta on provided by the receiver manufac-
turer or fi er.
UNSUCCESSFUL copy:
In this case repeat the copying procedure observing the instruc ons provided with the Silca remote control
indicated by Easy Scan Plus.
If the remote control copy is not successful contact the A er-Sales Service.
10 Copyright Silca S.p.A 2016
Copy on
Silca Air X SW yy.yy
Rolling Code S.L.
(ESC) Back (ENT) Next
Copy check
Press the same key
on copied Remote
(ESC) main menu
procedure or according to the procedure
)
Copy check
SUCCESSFUL copy
Compatible A.L.S.
Rolling Code
(ENT) to continue
Copy check
SUCCESSFUL copy
Compatible OEM.
(ENT) to continue
Copy check
WRONG copy
not matching code
(ESC) main menu
English
433 MHz
433 MHz
433 MHz
433 MHz
433 MHz