Tabla de contenido
Idiomas disponibles
Idiomas disponibles
4.3 Selecting the Correct Cuff
This monitor includes two different cuff sizes, Medium and Large. Select the cuff size to
match the circumference of your upper arm (close fitting, measured in the center of the
upper arm). Medium is the correct size for most people.
If the enclosed cuffs do not fit, call 1-866-464-6184. Use only approved cuffs. If you need
extra cuffs you may look for the Microlife or the CVS brand Large Cuff (Model #271237)
which is compatible with this monitor.
4.4. Cuff tube connection
Insert the cuff tube into the opening on the side of
the monitor indicated by the drawing of a cuff.
4.5. Select the Measuring Mode: Standard or Microlife
Averaging Mode
This instrument enables you to select either standard (standard sin-
gle measurement) or Microlife Averaging Mode (automatic triple
measurement). To select standard mode, push the switch on the
side of the instrument downward to Position "1" and to select
Averaging mode, upwards to Position "3". If you select 1 then only
one measurement will be taken. If you select 3, the unit will inflate
and deflate three times resulting in one final average measurement.
4.6. Select the User
This blood pressure monitor is designed to store 99 measurements
for each of two users. Before taking a measurement, be certain that
the correct user has been selected.
a) With the unit off, press and hold the TIME button for 3 sec-
onds until the user icon in the upper left corner of the LCD
screen flashes.
b) Press the "M" button to toggle between users.
c) Press the START button to make your selection.
4.7. Microlife Averaging Mode Technology
• In Microlife Averaging Mode, three measurements are automatically taken in succession
and the result then automatically analyzed and displayed. Because your blood pressure
constantly fluctuates, a result determined in this way is more reliable than one produced
by a single measurement.
• After pressing the On/off button the selected Microlife Averaging Mode appears in the
display as the
• The bottom, right hand section of the display shows a 1, 2 or 3 to indicate which of the 3
measurements is currently being taken.
8
symbol.
1
3
Capítulos
Tabla de contenido
