Orbegozo FO 6500 Manual De Instrucciones página 13

Idiomas disponibles

Idiomas disponibles

FO 6500
− Press the corresponding knob and turn it anti‐clockwise.
− Bring a flame close to the burner to ignite it.
− When the burner is on, the flame may be regulated according to the desired cooking speed. For
maximum position, turn the knob fully to the left.
4. REGULATING THE FLAME
The flame can be regulated. The knob has the following symbols:
5. TURNING THE BURNERS OFF
When you have finished cooking, turn the knob rightwards to the "OFF" position and turn off the
bottle gas supply.
WARNING: THE USER CANNOT HANDLE THE PARTS PROTECTED BY THE MANUFACTURER.
CLEANING-MAINTENANCE
To ensure the proper functioning of your appliance, it must be cleaned regularly and with care as
indicated below:
- Enamel or painted parts: wash with soap and water, rinse and dry with a soft cloth. Abrasive
substances must not be used;
- Chrome-plated parts: wash with soap and water, rinse and dry. If necessary, use appropriate liquid
detergents, but never abrasive ones.
- Burner: wash with soap and water and dry: after cleaning, make sure that all the flame-spreader
holes are clean and unblocked.
- Clean all accessible burner parts after every use.
- Never leave any residue on the surface.
- WARNING: never use abrasive detergent products
- In the event of prolonged non-use of the appliance, it should be stored away in its packaging and
kept in a clean and dry place.
- If the holes of the burners and the Venturi tube are blocked, never use metallic objects to unblock
them. The diameter of the holes might be altered and lead to the malfunctioning of the appliance.
For example, use compressed air.
- In the event of any technical problem, please contact the installer or a specialized technician.
- All appliance components and parts may only be replaced by a specialized technician.
WARNINGS
- If the taps open or close with difficulty, do not force them and contact the technical assistance
service.
- Check regularly the state of the gas connection, and, if necessary, replace it.
- If the appliance is not going to be used for a long period of time, turn off the general gas supply.
13
loading