Philips AC3036 Manual Del Usuario página 15

Filter reset
You can replace the filter even before filter replacement alert (
the screen� After replacing a filter, you need to reset the filter lifetime counter
manually�
1
Touch the power
unplug from power socket�
2
Put the power plug in the power socket�
3
Within 15 seconds after power on, touch and hold
3 seconds to reset the filter lifetime counter (fig w)�
6 Storage
1
Turn off the air purifier and unplug from the power socket�
2
Clean the air purifier, particle sensor and the surface of the filter (see
chapter 'Cleaning and maintenance')�
3
Let all parts air dry thoroughly before storing�
4
Wrap the filter in air tight plastic bags�
5
Store the air purifier, filter in a cool, dry location�
6
Always thoroughly wash hands after handling the filter�
7 Troubleshooting
This chapter summarizes the most common problems you could encounter
with the appliance� If you are unable to solve the problem with the information
below, contact the Consumer Care Center in your country�
Problem
The appliance
does not work
properly�
button for 3 seconds to turn off the appliance and
Possible solution
• Check if the back cover is properly installed�
• The filter replacement alert has been on continuously
but you have not replaced the corresponding filter� As a
result, the appliance is now locked� In this case, replace
the filter and long press
counter�
) displays on
and button for
to reset the filter lifetime
EN
13