Replacing The Filter; Understanding The Healthy Air Protect Lock; Filter Reset - Philips 800 Serie Manual Del Usuario

5 Replacing the filter

Understanding the healthy air protect lock

This appliance is equipped with the healthy air protect lock to make sure that
the NanoProtect filter is in optimal condition when the appliance is operating�
When the filter is almost expired, the filter replacement alert (
red, which indicates that it needs to be replaced� If you do not replace the
filter in time, the filter replacement alert (
operating and get locked�
Replacing the filter
Note:
• The filter is not washable or reusable�
• Always turn off the air purifier and unplug from the electrical outlet before
replacing the filter�
1
Rotate the base anti-clockwise to remove it from the appliance (fig c)�
2
Pull the filter out from the appliance� Discard the used filter (fig d)�
3
Remove all packaging materials of the new filter (fig e)�
4
Put the filter into the appliance (fig f)�
5
Reattach the base and rotate it clockwise to fasten the base (fig g)�
6
Put the plug of the air purifier in the power socket�
7
Press the power
8
Press and hold
9
Wash your hands thoroughly after replacing the filter�

Filter reset

You can replace the filter even before filter replacement alert (
the screen� After replacing a filter, you need to reset the filter lifetime counter
manually�
1
Press the power button
2
Within 10 seconds after power on, press and hold the mode switch button
for 5 seconds to reset the filter lifetime counter�
8 EN
button to switch on the appliance�
for 3 seconds to reset the filter lifetime counter�
to turn on the appliance�
) will flash� The appliance will stop
) lights up
) displays on