Filter Reset; Storage; Troubleshooting - Philips AC4236 Manual Del Usuario

7
Put the plug of the air purifier in the power socket�
8
Touch the button to switch on the appliance�
9
Touch and hold the filter status check/reset button
reset the filter lifetime counter (fig x)�
10
Wash your hands thoroughly after replacing the filter�
Note: Do not smell the filter as it has collected pollutants from the air�

Filter reset

You can replace the filter even before filter replacement alert (
the screen� After replacing a filter, you need to reset the filter lifetime counter
manually�
1
Touch the power
unplug from power socket�
2
Put the power plug in the power socket�
3
Within 15 seconds after power on, touch and hold
3 seconds to reset the filter lifetime counter (fig y)�

6 Storage

1
Turn off the air purifier and unplug from the power socket�
2
Clean the air purifier, particle sensor and the surface of the filter (see
chapter 'Cleaning and maintenance')�
3
Let all parts air dry thoroughly before storing�
4
Wrap the filter in air tight plastic bags�
5
Store the air purifier, filter in a cool, dry location�
6
Always thoroughly wash hands after handling the filter�
7

Troubleshooting

This chapter summarizes the most common problems you could encounter
with the appliance� If you are unable to solve the problem with the information
below, contact the Consumer Care Center in your country�
button for 3 seconds to turn off the appliance and
for 3 seconds to
) displays on
and button for
EN 13