Idiomas disponibles
Idiomas disponibles
USING THE AUDIO/ VIDEO INPUT JACKS
CONNECTING A VCR OR OTHER EXTERNAL EQUIPMENT
Switch off TV and external equipment before connecting cables. (Cables are not supplied.)
1. Connect VCR, DVD, DSS, or other equipment's Audio Out (R/L) to the TV Audio
Input (R/L)
.
For Mono VCR (Single Audio Jack) connect VCR Audio Out to TV Audio (L) Input.
2. Connect VCR, DVD, DSS, or other equipment's Video Out to the TV Video Input
Optional
Connect VCR, DVD, DSS, or other equipment's S-Video Out to the TV S-Video In Jacks
Using the S-Video In jacks overrides the Video In jacks
3. Press POWER
to turn on the TV. Turn on external equipment also.
•
4. Press the INPUT/TV
VCR key
equipment you have connected to the A/V1 and A/V2 jacks.
Follow the same procedure to connect other compatible video equipment to the second set
of A/V jacks.
RF
CHANNEL
CH3 CH4
AUDIO
AUDIO
OUTPUT
OUTPUT
L
R
USING THE AUDIO OUTPUT JACKS
CONNECTING A STEREO AMPLIFIER TO AUDIO OUT JACKS
1. Connect the TV Audio Output (R/L)
2. Press POWER to turn on the TV. Turn on external equipment also.
3. Use the AUDIO OUTPUT on-screen menu options (see page 12) to select
Fixed or Variable output signal.
Notes: When TV Speakers is in the ON
mode, sound will be produced
through your TV and external
speakers.
When TV Speakers
is in the OFF mode,
sound will be pro-
duced only through
the external speakers.
to select program source: TV signal or signal from the
A/V JACKS
IN
BACK VIEW OF VCR
R-
AUDIO
-L
VIDEO
OUT
R-
AUDIO
-L
VIDEO
TV A/V INPUT REAR JACKS
UHF/VHF/CATV
75Ω
AUDIO VIDEO INPUT
AUDIO VIDEO INPUT
AV2
AV2
AV1
AV1
S-VIDEO
S-VIDEO
VIDEO
VIDEO
INPUT
INPUT
(MON0)
AV1
AV1
L
L
(MON0)
AUDIO
AUDIO
AV2
AV2
R
R
to the Stereo Amplifier In (R/L)
STEREO AMPLIFIER
.
REMOTE CONTROL
VCR
TV
AUX
DVD PLAYER
.
UHF/VHF/CATV
AUDIO
AUDIO
AUDIO VIDEO INPUT
AUDIO VIDEO INPUT
OUTPUT
OUTPUT
AV2
AV2
AV1
AV1
S-VIDEO
S-VIDEO
VIDEO
VIDEO
INPUT
INPUT
(MON0)
L
AV1
AV1
L
L
AUDIO
AUDIO
(MON0)
AV2
AV2
R
R
R
BACK OF TV
QuickTips
Make sure all cable
connectors are fully
seated on jacks.
Always match cables
according to the
colors;
for right
RED
.
audio,
for left
WHITE
audio and
YELLOW
.
video.
AV1 and AV2 jacks
have identical
functions. Any
compatible video
equipment can be
connected to either
set of jacks.
A solid Blue screen
DVD
with the word Video1
or Video2 displayed
means that the Video
mode is selected, but
no signal is being
detected at the Video
jack. Check connec-
tion, and turn on
external equipment.
You may be able to
use the remote
control to operate
your VCR, DVD,
Cable Box, Satellite
Receiver, and TV.
(See pages 7~9.)
Position your TV at
least 2 feet from
stereo speakers. The
magnets in the speak-
ers may affect the
picture quality.
75Ω
Do not connect
external speakers
directly to the TV.
Need help?
Visit our website at
www.sanyoctv.com
or Call 1-800-877-5032
for
13
