Haier HCH2100ACS Instrucciones De Instalación Y Manual Del Usuario página 13

Plug into a grounded 3 prong outlet.
Do not remove the ground prong from the power cord plug.
Do not use an adapter.
Do not use an extension cord.
Failure to do so can result in death, re or electrical shock.
1. Before mounting the range hood, plug the range hood into a grounded 3 prong
outlet to test all functions for proper operation.
•
Blower works at all speeds.
•
Lights turn on and off.
•
The damper flaps open when the blower is on.
2. Using two or more people, hang range hood on two mounting screws through
the mounting slots on back of hood.
b
3. Remove the grease filter. See "Range Hood Care" section.
4. Level the range hood and tighten upper mounting screws.
5. Install two 5 x 45 mm lower mounting screws and tighten.
6. Fit vent system over the exhaust outlet.
7. Seal connection with clamps.
8. Check that back draft dampers work properly.
WARNING
Electrical Shock Hazard
a
b
a
Mounting Screws
b
Mounting Slots
11