BaByliss G934E Manual Del Usuario página 52

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 137
The ON/OFF/READY indicator light is red and is flashing
The appliance has switched to the safety mode because it has detected that it is overheated or there
is a critical problem (broken fan, capacitor problem, etc.). Under circumstances like these, switch the
appliance off and allow it to cool for 15 minutes before switching it on again.
If the problem persists, contact the BaByliss customer service in your area.
The 'ON/OFF/READY'' indicator light will flash green/red alternately.
The adapter being used to connect your Homelight appliance to the mains is not that supplied with
your appliance or it is defective.
If the problem persists, contact the BaByliss customer service in your area
The ON/OFF/READY' indicator light is red.
The appliance has reached its end of life.
Opening your Homelight epilator could expose you to dangerous electrical parts and the energy of the
pulsed light, which could cause serious physical injury and/or irreversible eye injury.
Opening your Homelight epilator could also damage the appliance and will void the warranty.
Please contact BaByliss customer service if your appliance is broken or damaged and requires repair.
9. Customer Service
For more information on Homelight products, please visit www.babyliss.com
If your device is broken, damaged, needs repair or if you need any assistance, please contact BaByliss
customer service.
10. FAQ
1. Is the Homelight epilator truly effective?
Yes. Clinical tests have proven that the BaByliss Homelight epilator achieves long-lasting results in complete
safety.
2. On what parts of the body can I use the Homelight epilator?
The Homelight epilator by BaByliss has been designed for removal of body hair. The areas most commonly
treated with the Homelight epilator are the legs, underarms, arms, the bikini line and the face (cheeks, upper
lip and chin)
54
IB_G932-34E.indd 54
Do not attempt to open or repair your Homelight epilator yourself.
Only certified repair centres are authorised to make repairs.
5/13/14 1:02 PM
loading