hafele DT 710 Instrucciones De Funcionamiento página 13

Ocultar thumbs Ver también para DT 710:
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 24
7. Clearing locking authorisations
7.1 Clearing the
locking
authorisation of
individual keys
7.2 Procedure to follow
if a user key is lost
8. Operation
8.1 Standard
operation
• User keys with deadbolt lock function
User keys with the deadbolt lock function have the same rights as normal user
keys, but can set doors to permanently open. Presenting any valid user key locks
the lock.
For step-by-step instructions "Allocating locking authorisations -
user keys deadbolt lock function" see illustrations starting on
page 51.
For step-by-step instructions "Clearing locking authorisations -
individual user keys" see illustrations starting on page 52.
If a user key has been lost, the category to which the lost user key belonged must
be determined (normal user key, privileged user key or user key with deadbolt lock
function).
Then all user keys in this category must be cleared at the affected door terminals.
• For normal user keys:
For step-by-step instructions "Clearing locking authorisations -
normal user keys" see illustrations starting on page 53.
• For privileged user keys:
For step-by-step instructions "Clearing locking authorisations-
privileged user keys" see illustrations starting on
page 54.
• For user keys with deadbolt lock function:
For step-by-step instructions "Clearing locking authorisations -
user keys with deadbolt lock function" see illustrations starting on
page 55.
Then locking authorisations must be allocated to all of the required user keys again
(see chapter "6. Allocating locking authorisations").
From the inside:
• Open door using lever handle.
The door can be opened from the inside at any time using the lever handle.
From the outside:
• An authorised user key is needed to open the door from the outside.
For step-by-step instructions "Operation" see illustrations
starting on page 56.
13
loading