Technical Data - Powerfix Profi KH 2927-1 Instrucciones De Uso

Medidor por ultrasonidos
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

• Do NOT direct the laser beam at strongly reflective
material. Reflected laser beams are also dangerous.
• Any adjustment intended to increase the intensity of the
laser beam is forbidden. There is also a risk of personal
injury!
• No liabilty will be accepted for damage resulting from
manipulation to the laser equipment as well as from
disregarding these safety instructions.
Warning against damage to the appliance!
• NEVER subject the appliance to rain.
Do not use the appliance in wet or moist environments.
Interaction with batteries
Risk of explosion!
Do not throw batteries into a fire.
Do not recharge non rechargeable batteries.
• Never open batteries, never solder or weld batteries.
Never short circuit batteries. The risk of explosions and
injuries exists!
• If you do not intend to use the appliance for an extended
period remove the battery, otherwise it could leak
corrosive acids.
• If the batteries have leaked, put on a pair of protective
gloves to avoid the risk of injury through chemical burns.
Clean the battery compartment and the battery contacts
with a dry cloth.
• Always replace the battery with a battery of the same
type.
• Keep batteries away from children. Children can put
batteries into their mouths and swallow them.
If a battery is swallowed immediately seek medical
assistance.

Technical data

Electricity supply:
Measurement range:
Measurement accuracy:
Laser class:
Wavelength ( ):
Output level (P max.):
9V Block battery, 6LR61
0.6 16 m
+/ 1%
2
650 nm
<1mW
- 39 -

Hide quick links:

Tabla de contenido
loading

Tabla de contenido