Idiomas disponibles
Idiomas disponibles
H O W TO U S E
CYCLE OPTION BUTTONS
Your washing machine features several additional
cycle options to customize cycles to meet your
individual needs. Certain option buttons also
feature a special function that can be activated
by pressing and holding that option button for 3
seconds.
NOTE: To protect your garments, not every wash/
rinse temperature, spin speed, soil level, or option
is available with every cycle. See the Cycle Guide
for details.
EXTRA RINSE
fabrics. Pressing the EXTRA RINSE button twice
will add two additional rinses to the cycle.
Press the POWER button to turn on the
1
washer.
Turn the cycle selector knob to select the
2
desired cycle.
Press the CYCLE MODIFIER buttons to
3
change the desired settings.
Press the EXTRA RINSE.
4
• If you want to delete extra rinse, press the
EXTRA RINSE three times.
Press the START/PAUSE button to start the
5
cycle.
NOTE: You cannot select the EXTRA RINSE
option while the spin cycle.
WATER PLUS
Press and hold the EXTRA RINSE button for 3
seconds to activate or deactivate WATER PLUS.
Press the START/PAUSE button during wash
1
or rinse cycle.(It is not available in spin cycle)
2
Press and hold the EXTRA RINSE.
Press the START/PAUSE button to start the
3
cycle.
If you want to use additional water, repeat
4
steps 1 through 3.
NOTE: If the machine reaches its maximum water
level, the WATER PLUS button will have no effect.
NOTE: You cannot select the WATER PLUS
option in the SANITARY, TUB CLEAN, and
22
BULKY/BEDDING cycle.
This option will add an extra rinse
cycle to the selected cycle. Use this
option to help ensure the removal
of detergent or bleach residue from
Select this option to add extra
water to the wash and rinse cycles
for superior results, especially with
large or bulky items.
COLDWASH™
Use this option to eliminate using
the built-in water heater booster.
For maximum efficiency, wash only
small loads. (less than 8 lbs.)
NOTE: If you select STAIN CARE™, the
COLDWASH™ option is not available.
Press the POWER button to turn on the
1
washer.
Turn the cycle selector knob to select the
2
cycle. (Refer to page 15.)
Press the COLDWASH™ button.
3
Press the START/PAUSE button to start the
4
cycle. The washer will start automatically.
FABRIC SOFTENER
The fabric softener is dispensed
in the final rinse. Select FABRIC
SOFTENER button to change final
rinse type from spray rinse to deep
rinse.
NOTE: LG recommends using FABRIC
SOFTENER or EXTRA RINSE options when
selecting the COTTON/NORMAL or HEAVY DUTY
cycles.
NOTE: If you select EXTRA RINSE instead of
FABRIC SOFTENER, the fabric softener will be
dispensed during the extra rinse course.
DELAY WASH
Once you have selected the cycle
and other settings, press this button
to delay the start of the wash cycle.
Each press of the button increase
the delay time, up to 19 hours.
