Idiomas disponibles
Idiomas disponibles
CYCLE MODIFIER BUTTONS
RINSE + SPIN
Select this option to rinse and spin a load
separately from a regular cycle. This can be
helpful in preventing fresh stains from setting in
fabrics.
• You can change rinse temperature and spin
speed by pressing WASH/RINSE and SPIN
SPEED respectively.
Press the POWER button to turn on the
1
washer.
Press the SPECIAL USE button until the
2
RINSE+SPIN indicator light is lit. (The cycle
light will turn off.)
Press the START/PAUSE button to start the
3
cycle. The washer will start automatically.
SPIN ONLY
This button activates the Drain & Spin cycle to
drain and spin.
Press the Power button to turn on the
1
washer.
Press the SPECIAL USE button until the
2
SPIN ONLY indicator light is lit.
Press the START/PAUSE button to start the
3
cycle. The washer will start automatically.
STAIN CARE™
STAIN CARE™ may be selected as an option with
HEAVY DUTY, COTTON/NORMAL and TOWELS
cycles.
• Wash only small loads for optimum fabric care.
(less than 8 lbs.)
Press the POWER button to turn on the
1
washer.
Press the SPECIAL USE button until the
2
STAIN CARE™ indicator light is lit.
Press the START/PAUSE button to start the
3
cycle. The washer will start automatically.
NOTE: If you select STAIN CARE™, the
COLDWASH™ option is not available.
(cont.)
SOAK
Allows the consumer to remove stains more
thoroughly by specifying additional time for the
clothing to soak during washing. At the end of
SOAK, the wash cycle will be started without
drain.
• Cycle time will be increased by 30 minutes.
• It is normal that washer do weak agitation
during SOAK cycle.
NOTE: You cannot select the SOAK option in the
TUB CLEAN cycle.
H O W TO U S E
21
