GreenWorks LME455 Manual Del Operador página 13

Idiomas disponibles

Idiomas disponibles

4. Lock the handles into position.
5. Stand the machine on end and make sure that the brackets
touch the floor.
10
TROUBLESHOOTING
Problem
Possible cause
The handle is not
The bolts are not
in position.
engaged correctly.
The machine does
The battery ca-
not start.
pacity is low.
The start handle is
defective.
The battery key is
not put in.
The machine cuts
The lawn is rough. Examine the mow-
grass unevenly.
The blade height is
not set correctly.
The machine does
Wet grass clip-
not mulch correct-
pings attach to the
ly.
deck.
The mulch plug is
missing.
The machine is
The grass is too
hard to push.
tall, or the blade
height is too low.
The grass catcher
and the blade
drags in thick
grass.
There is a high vi-
The blade is un-
bration in the ma-
balanced and
chine.
worn.
The motor shaft is
bent.
English
Problem
The machine stops
during mowing.
Solution
Adjust the height
of the handle and
make sure that the
bolts and nuts are
aligned correctly.
Charge the battery
pack.
* If you cannot find the solution to these problems, go to the
service center.
Replace the start
handle.
11
Put in the battery
key.
Voltage
Motor
ing area.
No load speed
Move the wheels
Self-propelled speed
to a higher posi-
tion.
Deck size
Wait until the
Height adjustments
grass dries before
Front wheel
mowing.
Rear wheel
Install the mulch
plug.
Functions
Increase the blade
height.
Weight (without bat-
tery pack)
Empty the grass
Battery model
clippings from the
grass catcher.
Charger model
12
Replace the blade.
1. Stop the mo-
tor.
2. Remove the
safety key and
battery pack.
3. Disconnect the
power source.
Greenworks hereby warranties this product, to the original
4. Inspect for
purchaser with proof of purchase, for a period of three (3)
damage.
years against defects in materials, parts or workmanship.
5. Repair the ma-
Greenworks, at its own discretion, will repair or replace any
chine before
and all parts found to be defective, through normal use, free
you start it
of charge to the customer. This warranty is valid only for
again.
units which have been used for personal use that have not
been hired or rented for industrial/commercial use, and that
13
Possible cause
The blade height is
too low.
The battery pack is
out of power.
The grass clip-
pings attach to the
deck or the blade.
Operation temper-
ature of the ma-
chine is too high.
TECHNICAL DATA
48 V
Brushless
2850 RPM / 3250 RPM (Turbo)
1.9-4.9 fps (0.6-1.5 m/s)
20"
1 3/8 - 4" (3.5 - 10.2 cm)
8"
10"
4-in-1 (Mulch, Rear Bag, Side Dis-
charge, Turbo)
60.2 lbs (27.3 kg)
BAG710 and other BAG series
CAG817 and other CAG series
LIMITED WARRANTY
3
YEAR
ANS
AÑOS
LIMITED WARRANTY
GARANTIE LIMITÉE
GARANTÍA
LIMITADA
EN
Solution
Increase the blade
height.
Charge the battery
pack.
Remove the bat-
tery pack and
check the deck.
Cool the machine.
loading

Este manual también es adecuado para:

Mo48l4211Mo48l4211-d