Idiomas disponibles
Idiomas disponibles
Set time (Time)
82 •
– MA: Measured results from scales
– HI_MA: Measured results from length
measuring devices and scales
– off: No automatic printout, printout only if
Enter key is held down during weighing.
4. Confirm your selection.
– You will leave the menu automatically.
You can configure the system so that the wireless
printer automatically adds the date and time to the
measured results. To do so, you have to set the date
and time once on the device and transmit this to the
wireless printer's internal clock.
NOTE:
This function is only available if the "learn" func-
tion has been used to integrate a seca wireless
printer in the wireless group.
1. Switch the device on.
2. Select the menu item "Time" in the "rf" submenu.
3. Confirm the selection.
The current selection for the year (Year) is
displayed.
4. Select the correct year.
5. Confirm the selection.
6. Repeat steps 3. and as appropriate for the month
dAy
(
), day (
7. Confirm your selection each time.
After confirming your selection for Minute you will
leave the menu automatically.
These selections will be automatically transmitted
to the wireless printer.
The wireless printer automatically adds the date
and time to every printout.
NOTE:
For further operation of the wireless printer see
its user manual.
hour
), hour (
) and minute (
).
