Idiomas disponibles
Idiomas disponibles
Installing or removing circular saw
blade
CAUTION:
Be sure the circular saw blade is
installed with teeth pointing up at the front of the
tool.
CAUTION:
Use only the Makita wrench to
install or remove the circular saw blade.
1.
Loosen the lever on the depth guide and move the
base down.
Fig.18
► 1. Lever
2.
Install the inner flange, ring (country specific),
circular saw blade, outer flange and hex bolt. At this
time, align the direction of the arrow on the blade with
the arrow on the tool.
For tool without the ring
Fig.19
► 1. Hex bolt 2. Outer flange 3. Circular saw blade
4. Inner flange 5. Arrow on the circular saw blade
6. Arrow on the tool
1
1
2
5
3
4
6
12 ENGLISH
For tool with the ring
Fig.20
► 1. Hex bolt 2. Outer flange 3. Circular saw blade
4. Ring 5. Inner flange 6. Arrow on the circular saw
blade 7. Arrow on the tool
3.
Press the shaft lock fully so that the circular saw
blade cannot revolve and use the hex wrench to tighten
the hex bolt.
1
Fig.21
► 1. Shaft lock 2. Hex wrench 3. Loosen 4. Tighten
1
2
6
3
4
5
7
2
3
4
