SNOWJOE 24V-SS13-TV1 Manual Del Operador página 8

Idiomas disponibles

Idiomas disponibles

Technical Data
Motor .............................................................................. 400 W
Battery Voltage Max* .................................................. 24V D.C.
Battery Capacity ............................................................. 4.0 Ah
Charger Input ............................................................. 120V AC,
Charger Output .................................................... 26V DC, 2.2A
Charge Time Max ................................................... 1 hr 50 min
Rotor ................................................................. 2-blade plastic
No Load Speed ............................................. 1650 ± 10% rpm
Clearing Width ..................................................... 13 in. (33 cm)
Depth of Snow Cut ................................................ 6 in. (15 cm)
Throw Distance Max ................................................. 20 ft (6 m)
Net Weight .......................................................... 14 lbs (6.4 kg)
*Initial no-load voltage, when fully charged, peaks at 24 volts; nominal voltage
under typical load is 21.6 volts.
Unpacking
Carton Contents
• Cordless snow shovel upper pole assembly
• Cordless snow shovel lower pole assembly
• Cordless snow shovel middle pole assembly
• Pole knob and bolt (2 sets)
• 24V iON+ lithium-ion battery
• 24V iON+ lithium-ion battery charger
• Snow shovel protective cover
• Ice + snow windshield scraper
• Manual with registration card
1. Carefully remove the cordless snow shovel and check to
see that all of the above items are supplied.
2. Inspect the product carefully to make sure no breakage or
damage occurred during shipping. If you find damaged or
missing parts, DO NOT return the unit to the store. Please
call the Snow Joe
+ Sun Joe
®
1-866-SNOWJOE (1-866-766-9563).
NOTE: Do not discard the shipping carton and packaging
material until you are ready to use your new cordless snow
shovel. The packaging is made of recyclable materials.
Properly dispose of these materials in accordance with
local regulations.
IMPORTANT! The equipment and packaging material are
not toys. Do not let children play with plastic bags, foils
or small parts. These items can be swallowed and pose a
suffocation risk!
60 Hz, 75 W
paddle auger
customer service center at
®
Battery Pack Operation
The equipment is powered by a lithium-ion battery. The battery
pack is completely sealed and maintenance free.
m
WARNING!
Before first use, the battery requires at
least 5 hours charge time to be fully charged. When the
battery is at low capacity, recharge for 5 hours again before
resuming operation.
Battery Charge Level Indicator
The battery pack is equipped with a push button for checking
the charge level. Simply press the push button to read off the
battery charge level from the LEDs of the battery indicator:
• All 3 level monitoring LEDs are lit: Battery charge level
is high.
• 2 level monitoring LEDs are lit: Battery charge level is
decreasing. Stop work as soon as possible.
• 1 level monitoring LED is lit: Battery is flat. Stop work
IMMEDIATELY and charge the battery. Otherwise the
battery's service life will be greatly shortened.
Lights
Light Indicators
Charge level button
The battery is at 30% capacity
and requires charging
The battery is at 60% capacity
and requires charging soon
The battery is at full capacity
NOTE: If the charge level button does not appear to be
working, connect the battery to the charger and charge as
needed.
NOTE: Immediately after using the battery pack, the charge
level button may display a lower charge than it will if checked
a few minutes later. The battery cells "recover" some of their
charge after resting.
Charger Operation
m
WARNING!
Charge only 24V iON+ lithium-ion
battery packs with their compatible 24V iON+ lithium-ion
charger. Other types of batteries may cause personal injury
and damage.
To reduce the risk of electric shock, do not allow water to flow
into the charger's AC/DC plug.
8
loading

Este manual también es adecuado para:

24v-ss13