Idiomas disponibles
Idiomas disponibles
BM 2610957389 04-09:BM STN150-18 06-09 6/17/09 7:45 AM Page 11
Disconnect the tool from the air source
WARNING
!
before attempting to clear a jammed
staple. Such precautionary safety measures reduce the risk
or unintentional tool operation.
If a staple becomes jammed in the nosepiece, follow these
instructions to remove the jammed staple:
1. Release the trigger.
2. Disconnect the air supply from the tool.
3. Remove staples from the magazine as described in
"Staple Unloading."
4. Push Quick Clear Lever to open position and pivot open
the nose, figure 14.
5. Remove the staple, using pliers if necessary.
6. Close nose and push Quick Clear Lever to closed
position, figure 15.
7. Reinsert staples into the magazine as described in
"Staple Loading".
8. Reconnect air supply as described in "Connecting Air
Supply".
NOTE: If the driver blade does not return to its up position,
disconnect air supply and contact a BOSCH factory service
center or authorized BOSCH service station.
NOTE: If nails continue to jam frequently in the nose piece,
contact BOSCH service center for repair.
Adjustable Exhaust Deflector
This tool has an adjustable exhaust deflector that allows the
exhaust air to be blown away from user or workpiece,
figure 16.
Jam Clearing
Operation
FIG. 14
Nose
FIG. 15
FIG. 16
11.
Quick
Clear
Lever
Adjustable
Exhaust
Deflector
