Idiomas disponibles
Idiomas disponibles
Do not strip metal window frames, as
the heat may be conducted onto the
glass and crack it. When stripping
other window frames, use the glass
protection nozzle.
Do not keep the tool directed at one
spot too long to prevent igniting the
surface.
Avoid collecting paint on the scraper
accessory, as it may ignite. If neces-
sary, carefully remove paint debris
from the scraper accessory using a
knife.
Stationary use
This tool can also be used in stationary mode.
Place the tool onto a stable workbench.
n
Secure the cable to prevent pulling the tool off the
n
workbench.
Carefully switch the tool on.
n
Make sure that the nozzle always
points away from you and any
bystanders.
Make sure not to drop anything into
the nozzle.
Cooling down
The nozzle and accessory become very hot during use.
Let them cool down before attempting to move or store
the tool.
To reduce the cooling time, switch the tool on at
n
the lowest air temperature setting and let it run for
a few minutes.
n
Switch the tool off and let it cool down for at least
30 minutes. Always place it vertical and standing.
MAINTENANCE AND CLEANING
Attention:
work on the equipment, pull the
power plug.
Maintenance
Your Power Tool has been designed to operate
n
over a long period of time with a minimum of
maintenance. Continuous satisfactory opera-
tion depends upon proper tool care and regular
cleaning.
Lubrication
Your power tool requires no additional lubrication.
n
Cleaning
Keep the ventilation slots clear and regularly clean
n
the housing with a soft cloth.
Cleaning
Keep the ventilation slots of the machine clean to
n
prevent overheating of the motor.
Regularly clean the machine housing with a soft
n
cloth, preferably after each use.
Keep the ventilation slots free from dust and dirt.
n
Before performing any
If the dirt does not come off use a soft cloth moist-
n
ened with soapy water.
Never use solvents such as petrol,
alcohol, ammonia water, etc. These
solvents may damage the plastic
parts.
TECHNICAL DATA
Model
Voltage
Power Temperature Air fl ow
No:
110V~50Hz
1300W
HG5030
120V~60Hz
1500W
220-240V~50Hz 1600W
110V~50Hz
1300W
HG6030
120V~60Hz
1500W
220-240V~50Hz 1800W
110V~50Hz
1300W
HG6031V
120V~60Hz
1500W
220-240V~50Hz 1800W
ENVIRONMENT
Should your appliance need replace-
ment after extended use, do not discard
it with the household rubbish but dispose
of it in an environmentally safe way.
Waste produced by electrical machine
items should not be handled like nor-
mal household rubbish. Please recycle
where facilities exist. Check with your
Local Authority or retailer for recycling
advice.
Subject to change without notice.
7 English
Overall
length
I 400°C
200L/M
II 550°C
400L/M
I 400°C
200L/M
233mm
II 550°C
400L/M
I 350°C
300L/M
II 500°C
500L/M
I 50°C
200L/M
II 350°C
200L/M
III 550°C
400L/M
I 50°C
200L/M
II 350°C
200L/M
233mm
III 550°C
400L/M
I 50°C
250L/M
II 300°C
250L/M
III 600°C
500L/M
I 50-350°C
200L/M
II 80-550°C
400L/M
I 50-350°C
200L/M
257mm
II 80-550°C
400L/M
I 50-400°C
250L/M
II 100-600°C
500L/M
Net
weight
0.56kg
0.57kg
0.67kg
