FEATURES
PRODUCT SPECIFICATIONS
Switch ..........................................................Variable Speed
Stroke Length ............................................................
KNOW YOUR RECIPROCATING SAW
See Figure 1, page 12.
The safe use of this product requires an understanding of the
information on the product and in this operator's manual as
well as a knowledge of the project you are attempting. Before
use of this product, familiarize yourself with all operating
features and safety rules.
ADJUSTABLE SHOE ASSEMBLY
The shoe assembly of the reciprocating saw pivots up and
down in both directions. The length of the shoe assembly
is adjustable, and the pivot angle of the shoe can be set to
one of three positions.
LED GRIP LIGHT
The LED light, located below the blade clamp, illuminates
when either the switch trigger or grip light switch is de-
pressed.
ASSEMBLY
UNPACKING
This product has been shipped completely assembled.
Carefully remove the product and any accessories from
the box. Make sure that all items listed in the packing list
are included.
WARNING:
Do not use this product if it is not completely
assembled or if any parts appear to be missing
or damaged. Use of a product that is not properly
and completely assembled could result in serious
personal injury.
Inspect the product carefully to make sure no breakage
or damage occurred during shipping.
Do not discard the packing material until you have
carefully inspected and satisfactorily operated the
product.
If any parts are damaged or missing, please call
1-866-539-1710 for assistance.
No Load Speed
Motor .................................................................. 18 Volt DC
3/4 in.
LOCK-OFF BUTTON
Your saw is equipped with a "lock-off" button which reduces
the possibility of accidental starting. The lock-off button is
located on the handle above the switch trigger.
ORBITAL ACTION SELECTOR
Use the orbital action selector to select either a linear stroke
or orbital cutting action. A linear stroke is best for making
smooth cuts while orbital action is best for making a faster
cut.
TOOLLESS BLADE CLAMP
Your saw has a blade clamp design that does not require
the use of a tool (blade wrench) when installing or removing
the blade.
VARIABLE SPEED SWITCH TRIGGER
The variable speed switch trigger delivers higher speed
with increased trigger pressure and lower speed with
decreased trigger pressure.
PACKING LIST
Reciprocating Saw
Saw Blade
Operator's Manual
WARNING:
If any parts are damaged or missing, do not
operate this product until the parts are replaced.
Failure to heed this warning could result in serious
personal injury.
WARNING:
Do not attempt to modify this product or create
accessories not recommended for use with this
product. Any such alteration or modification is
misuse and could result in a hazardous condition
leading to possible serious personal injury.
WARNING:
To prevent accidental starting that could cause
serious personal injury, always remove the battery
pack from the tool when assembling parts.
6 - English
..................................
0-3,600 s/min (SPM)
