English
Standby mode
NOTICE
The machine must not be operated in
standby mode for more than 5 minutes.
Switch off the machine at the master
switch – see "Switching off the
machine",
if work is interrupted for more than
–
5 min,
during breaks,
–
if the machine is left unattended.
–
Pressure/quantity control on the
machine
Only RE 272 PLUS, RE 282 PLUS
Working pressure and water flow rate
can be set on the high-pressure pump
for long-term adjustment in line with the
cleaning job concerned.
2
1
Turn the knob (1) to set the working
N
pressure and water flow rate
The pressure in the high-pressure pump
is indicated by a pressure gauge (2).
50
High-pressure hose
NOTICE
Do not buckle or loop the high-pressure
hose.
Do not place any heavy objects on the
high-pressure hose, and do not drive
any vehicles over it.
Adding detergent
Detergent cannot be used when a high-
pressure hose extension is installed.
Detergent can only be drawn into the
machine in low-pressure operation.
Turning of the nozzle sleeve of the
N
nozzle as far as possible towards
"CHEM" = low-pressure operation
RE 232
Slide the intake hose as far as
N
possible into the separate container
RE 232, RE 272 PLUS, RE 282 PLUS