Fitting, Removing High-Pressure Hose; Connecting The Water Supply - Stihl RE 232 Manual De Instrucciones

Ocultar thumbs Ver también para RE 232:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 107
English
Fitting, removing high-
pressure hose
Machine without hose reel
Connecting the high-pressure hose
1
2
Push high-pressure hose onto the
N
connector (1)
Fit and attach the union nut (2) and
N
tighten it by hand
Disconnecting the high-pressure hose
Unscrew the union nut (2)
N
Pull high-pressure hose off of
N
connector (1)
Machine with hose reel
The high-pressure hose is already
connected.
46
High-pressure hose and spray gun
Fitting
2
3
1
Push the high-pressure hose (1)
N
onto the connector (2)
Fit and attach the union nut (3) and
N
tighten it by hand
Removing
4
3
Push the coupling (4) in the
N
direction of the arrow and hold it
Loosen the union nut (3) and
N
unscrew it from the connector in the
direction of the arrow
High-pressure hose extension
Always use only one high-pressure hose
extension (special accessory).
Connect the high-pressure hose
N
extension between the high-
pressure hose and spray gun.

Connecting the water supply

Briefly rinse out the water hose before
connecting it to the machine to prevent
sand and other particles from entering
the machine and the air is purged from
water hose is.
Connect hose (3/4" diameter, length
N
at least 10 m to absorb pressure
surges)
RE 232
2
1
RE 272
RE 282
2
1
Push the coupling (1) on to the hose
N
connector (2)
Turn on water supply
N
In suction operation, the machine can
also be connected to rivers, lakes,
cisterns and tanks, etc. – see
"Connecting to a pressureless water
supply".
RE 232, RE 272 PLUS, RE 282 PLUS
Tabla de contenido
loading

Este manual también es adecuado para:

Re 272 plusRe 282 plus

Tabla de contenido