Idiomas disponibles
Idiomas disponibles
ASSEMBLY / DISASSEMBLY
The assembly / disassembly operations of any machine part are performed with the stop machine, with the
plug disconnected from the socket and with water tap closet, or with the sectioning device in OFF and
with the basin completely empty, without nor water nor food products.
LATERAL DISCHARGE COLLECTOR ASSEMBLY
In the case that the machine is equipped with inferior fall water discharge of the dross drawer, the water and dross discharge
can be foreseen through the lateral fall discharge collector. The transformation and the intervention can be performed only
from the Authorized Assistance Center.
DISH AND ABRASIVE TELO DISASSEMBLY/ASSEMBLY INSIDE THE BASIN
1. Struggle on the handle (1) of the
transparent superior cover (2)
and lift it up to carry as back as
possible,
2. remove manually possible food
products present within the
basin (3),
3. grasp manually and lift the dish
(4) within the basin and extract
it.
4. in correspondence of the
discharge mouth, push manually
the abrasive cloth (5) towards
inside the basin. After grasp it
with both the hands and lift it
completely from the basin.
For the assembly repeat on the
contrary the above described
operations.
After having inserted the flat, check the correct bayonet hook in the rotating pivot.
FUNCTIONING DESCRIPTION
The control devices are designed and manufactured so as much sure and reliable and resistant to the service normal stresses, to
the foreseeable strains and to the external agents. Besides they are clearly visible, locatable and marked from a suitable
marking. Here follow the main control devices are showed:
TYPE / COLOR
Button / white and black
Button / black
Button / white
Button / white
Button / white
Button / white
Display / red
"
" / button for the general switching on and switching off of the controls panel.
O
"
" / button for the machine stop control
I
"
" / button for the machine starting control with impulse
"
" / button for the maintained action machine starting control with the opened discharge
lateral door (if any)
"
" / button for the functioning time increase (of 10 sec in 10 sec) keeping pushed it (of 1
sec in 1 sec)
"
" / button for the functioning time decrease (of 10 sec in 10 sec) keeping pushed it (of 1
sec in 1 sec)
Functioning time visualization
REFERENCE / DESCRIPTION
Pag.
di
12
17
