Panasonic DMR-E65 Instrucciones De Funcionamiento página 29

Idiomas disponibles

Idiomas disponibles

Play menu—Change the play sequence
This function works only when the elapsed play time is displayed.
Repeat play
≥All
[VCD]
[CD] (excluding MP3 discs)
≥Chapter
[RAM] [DVD-R] [DVD-V]
≥Group
[DVD-A] [CD] (MP3 discs only)
≥PL (Play list)
[RAM]
≥Title
[RAM] [DVD-R] [DVD-V]
≥Track
[DVD-A]
Select "OFF" to cancel.
Picture menu—Change the picture quality
Playback NR
Reduces noise and picture degradation.
§
Progressive
( page 49)
Select "ON" to enable progressive output.
Select "OFF" if the picture is stretched horizontally.
§
Transfer
[When "Progressive" ( above) is set to "ON".]
Select the method of conversion for progressive output to suit
the type of material being played ( page 49, Film and video).
When the output signal is PAL
≥Auto
Detects 25 frame-per-second film content and
appropriately converts it.
≥Video:
Select when using "Auto", and the video
content is distorted.
When the output signal is NTSC
≥Auto1
Detects 24 frame-per-second film content and
(normal):
appropriately converts it.
≥Auto2:
Compatible with 30 frame-per-second film
content in addition to 24 frame-per-second
film content. (Picture distortion may occur
depending on the content)
≥Video:
Select when using "Auto1" and "Auto2", and
the video content is distorted.
§
Only when you have set "Progressive" to "On" in the SETUP menu
( page 12).
Sound menu—Change the sound effect
V.S.S. [RAM] [DVD-R] [DVD-V]
(Dolby Digital, MPEG, 2-channel or over only)
Enjoy a surround-like effect if you are using two front speakers
only.
≥Turn V.S.S. off if it caused distortion.
≥V.S.S. does not work for bilingual recordings.
Dialog Enhancer [DVD-A] [DVD-V]
(Dolby Digital, 3-channel or over only, including a centre channel)
The volume of the centre channel is raised to make dialogue
easier to hear.
[VCD]
[CD]
Status messages
Status messages appear on the television when you operate the unit
to show the condition of the unit.
Press [STATUS].
The display changes each time you press the button.
≥Displayed information are examples.
Selected drive/type of disc
DVD-RAM
Recording or play status/input channel
REC
PLAY
TV audio type being received ( below)
STEREO
L R
Selected audio type
Title number and elapsed time during
recording/Recording mode
Date and time
π
Remain
18:53:50 11.10.
π T2
0:05.14 XP
π T1
0:00.10 SP
Play position
Title number and elapsed time during play/
Recording mode
No display
≥TV audio type
STEREO: STEREO/NICAM stereo broadcast
M 1/M 2: Bilingual/NICAM dual-sound broadcast
M 1:
NICAM monaural broadcast
Available recording time
and recording mode
0:50 XP
RQT7542
29
29
loading