Sony SU-WL850 Información De Instalación página 8

5
Install on the wall using
WM1
suitable screws (not supplied)
and washers (not supplied).
× 2
8 mm × 60 mm
Note
 Use a level to check whether
Precaution
 Do not over-tighten wooden screw 8 mm × 60 mm.
Improper tightening could reduce the holding
power of wooden screw 8 mm × 60 mm.
6
Drill lower pilot holes on the
marks. (Refer step 4 for the drill
instruction.)
7
Fit the suitable screws and
washers to the holes.
Note
 Use a level to check whether
WM1
WM1
is level.
× 2
WM1
× 2
WM1
is level.
− 8 (EN) −
8
Pull out the arm of the bracket to
the end.
Preparing for the Installation
of the TV or LCD Monitor
Note
 Be sure to store the removed screws and unused parts
in a safe place, keeping them away from children.
Installing the TV or LCD Monitor to
the Wall from Carton*
* Only for limited region/country/model.
FW-75BZ40L / 75BZ35L / 75BZ30L / 65BZ40L /
65BZ35L / 65BZ30L / 55BZ40L / 55BZ35L /
55BZ30L only
1
Remove the screws from the rear
of the TV or LCD Monitor.