Other Information
When removing the TV or LCD Monitor, reverse
the previous installation procedure.
WARNING
Two or more persons (three or more persons for
189.3 cm (75 inches) and above TV or LCD Monitor) are
needed to transport a large TV or LCD Monitor (except
Egypt).
Two or more persons (three or more persons for
75 inches (189.3 cm) and above TV or LCD Monitor) are
needed to transport a large TV or LCD Monitor (Egypt
only).
Attaching the Wall-Mount
Bracket to the Solid Concrete or
Concrete Block
WM1
Installing the Wall-Mount
Bracket to the Wall
1
Decide on the installation
location.
Make sure that the wall has enough space
for the TV or LCD Monitor and is capable of
supporting a weight of at least six times
that of the TV or LCD Monitor.
• Refer "Measurement for Wall-Mount
Bracket installation on the wall" on page
24.
• Refer to your TV's or LCD Monitor's
Reference Guide for the TV's or LCD
Monitor's weight.
Note
When your TV or LCD Monitor is installed on the
wall, the upper side of the TV or LCD Monitor
slightly leans forward.
We recommend you to check the position of TV or
LCD Monitor in the viewing environment.
2
Align
WM1
four marks.
× 4
Note
Use a level to check whether
3
Drill pilot holes on the marks.
Make sure the location on the wall to drill
the holes are strong enough to support a
weight of at least six times that of the TV or
LCD Monitor.
Note
Pilot holes must be drilled to a depth of 75 mm,
using a 10 mm diameter drill bit.
− 15 (EN) −
to the wall and make
WM1
WM1
is level.
× 4
10 mm
75 mm
EN