Idiomas disponibles
Idiomas disponibles
5. For your safety / 6. Packaging
Ensure that the transducer is only operated in accordance with the provi-
„
!
sions i.e. as described in the following instructions.
Do not interfere with or change the transducer in any other way than
„
Warning
described in these operating instructions.
Remove the pressure transmitter from service and mark it to prevent it from being used
„
again accidentally, if it becomes damaged or unsafe for operation
Take precautions with regard to remaining media in removed pressure transmitter.
„
Remaining media in the pressure port may be hazardous or toxic!
Have repairs performed by the manufacturer only.
„
The operator is responsible for the material compatibility as well as correct handling,
„
operation and maintenance.
Information about material consistency against corrosion and diffusion can be found in our
WIKA-Handbook, 'Pressure and Temperature Measurement'.
For transducer with Ex-/FM-marking: Consider the relevant safety instruc-
tions as well as the respective country specific regulations for installation
and operation in hazardous areas (e.g.: IEC 60079-14, NEC). If you do not
Warning
observe these stipulations, serious injuries and/or damage may occur.
6. Packaging
Has everything been supplied?
Check the scope of supply:
Completely assembled transducer
„
Inspect the transducer for possible damage during transportation. Should there be
„
any obvious damage, inform the transport company and WIKA without delay.
The UHP transducers are purified, evacuated and double-packed in clean rooms
„
in a protective atmosphere (clean room class 5 according to ISO 14644). Special
plastic protective caps are used to protect the high-quality threaded connections
(fittings). The gauges should remain in this special packaging until installation in order
to prevent damage and contamination. Therefore remove the ESD (Electro-Static-
Discharge) protective foil only at the place of installation.
6
WIKA Operating instructions/Betriebsanleitung/Mode d'emploi/Instrucciones de servicio WUC-1X
GB
