Labelling, Safety Marks; Transport, Packaging And Storage; Transport; Packaging And Storage - WIKA MH-4 Manual De Instrucciones

3. Safety / 4. Transport, packaging and storage

3.6 Labelling, safety marks

Product label

MH-4

P# Article number

Measuring range / Output signal / Power supply

Pin assignment

Approvals

Coded date of manufacture

S# Serial number

Symbols
Before mounting and commissioning the instrument, ensure you read the
operating instructions!

4. Transport, packaging and storage

4.1 Transport

Check the pressure sensor for any damage that may have been caused by transport.
Obvious damage must be reported immediately.
CAUTION!
Damage through improper transport
With improper transport, a high level of damage to property can occur.
▶
When unloading packed goods upon delivery as well as during inter-
nal transport, proceed carefully and observe the symbols on the
packaging.
▶
With internal transport, observe the instructions in chapter 4.2

"Packaging and storage".

4.2 Packaging and storage
Do not remove packaging until just before mounting.
Keep the packaging as it will provide optimum protection during transport (e.g. change
in installation site, sending for repair).
WIKA operating instructions pressure sensor, model MH-4
  

EN
9