Enlaces rápidos
8487408COM
Storage Cabinet
Date of Purchase ___ / ___ / ___
Lot Number:
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Secure Your Furniture
Keep your home and family safe
with the wall anchor kit that is
included with the product.
Serious or fatal crushing injuries can
occur from tipping furniture.
WARNING: Manufacturer assumes no liability
for improper installation or excessive loads
placed on screws or bracket. This wall anchor
is not a substitute for proper adult supervision.
Do Not Return This Product!
Contact our customer service team for help first.
Call: 1-866-452-4081 (toll free)
Monday-Friday 9am - 5pm CST
Visit: www.systembuild.com
Easy
Assembly Difficulty Meter
For the latest information on SystemBuild products
follow us at Ameriwood Home
B348487408COM0
Tough
You
Tube
Manuales relacionados para System Build 8487408COM
Resumen de contenidos para System Build 8487408COM
- Página 1 8487408COM Storage Cabinet B348487408COM0 Date of Purchase ___ / ___ / ___ Lot Number: Do Not Return This Product! Contact our customer service team for help first. Call: 1-866-452-4081 (toll free) Monday-Friday 9am - 5pm CST Visit: www.systembuild.com THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
- Página 2 Contact Us! Do NOT return this product! Contact our friendly customer service team first for help. Assembly Tips Call us! 1-866-452-4081 Monday-Friday 9am - 5pm CST Tube Visit systembuild.com to view the limited warranty valid in the U.S. and Canada. Helpful Hints PEOPLE NEEDED FOR ASSEMBLY: 1-2 ESTIMATED ASSEMBLY TIME: 1 HOUR...
- Página 3 Before You Start Read through each step carefully and follow the proper order Separate and count all your parts and hardware Give yourself enough room for the assembly process Have the following tools: Flat Head Screwdriver, #2 Phillips Head Screwdriver and Hammer Caution: If using a power drill or power screwdriver for screwing, please be aware to slow down and stop when screw is tight.
- Página 4 systembuild.com Tube...
- Página 5 Board Identification Not actual size shelf (2) 31117408030 Bottom 31117408040 This piece is paperboard construction. It is not made from wood, but is required for the assembly of your unit. Left Panel Back Panel Right Panel Adjustable shelf (2) 31117408010 K111740800 31117408020 37362408060...
- Página 6 Board Identification Not actual size SIDE BACK SIDE This piece is paperboard construction. It is not made from wood, but is required for the assembly of your unit. systembuild.com Tube...
- Página 7 Part List Actual Size (x10) (x8) (x8) (x8) (x8) (x4) #A12120 #A80250 #A21660 #A23030 #A22620 #A22610 7/16" round shelf support cam lock wood dowel confirmat screw cam bolt head screw (x2) #A89210 bumper (x2) (x10) (x4) (x8) (x10) (x4) #A11160 (x2) (x42) #A11080...
- Página 8 STEP 1 marked with "L" left cabinet member (x4) (x3) (x1) #A22610 #A11080 #A56770 step text finished edge marked with "L" systembuild.com Tube...
- Página 9 STEP 2 marked with "R" right cabinet member (x4) (x1) (x3) #A22610 #A56770 #A11080 finished edge marked with "R" systembuild.com...
- Página 10 STEP 3 Quick Assembly (x8) (x1) (x8) #A22620 #A84050 #A21660 Proper orientation of CAM LOCK Do not tighten screw. systembuild.com...
- Página 11 STEP 4 (x2) (x2) (x4) (x8) (x4) #A89020 #A11160 #A12930 #A12420 #A44140 top surface finished edge bottom surface Unscrew the two halves of the foot. Attach bottom half to bottom (D) and screw top half back on. systembuild.com...
- Página 12 STEP 5 Cam locks (1) on top surface. All finished edges will face up. systembuild.com...
- Página 13 STEP 6 All finished edges will face up. systembuild.com...
- Página 14 STEP 7 (x4) #A23030 All finished edges will face up. systembuild.com...
- Página 15 STEP 8 IMPORTANT! THE BACK PANEL IS A STRUCTURAL PART OF THIS UNIT AND MUST BE INSTALLED PROPERLY. (x42) #A21110 With the help of another person, turn your unit over on its front side as shown. Position the back panel as shown. Align squarely with all outer edge. Assure that your unit is square. Distance from corner to corner must be equal as shown.
- Página 16 STEP 9 (x4) (x2) #A12120 #A54520 SIDE SIDE systembuild.com...
- Página 17 STEP 10 (x4) #A12120 Be sure the groove in the drawer sides are centered with the groove in the drawer front SIDE SIDE systembuild.com...
- Página 18 STEP 11 SIDE finished surface SIDE STEP 12 You will need to tap the drive fasteners (8) lightly with a hammer to securely fasten. BACK SIDE (x4) #A21970 SIDE systembuild.com...
- Página 19 STEP 13 left drawer member right drawer member (x1) (x2) (x1) (x4) #A56770 #A17400 #A52680 #A11080 Note: Attach slides (21c&21d) first then attach handle. BACK SIDE SIDE systembuild.com...
- Página 20 STEP 14 (x1) (x2) #A12120 #A54900 Turn drawer over. Using two screws (6), attach the drawer brace (19) as shown. BACK systembuild.com...
- Página 21 STEP 15 (x8) (x8) (x4) #A65615 #A17400 #A52680 systembuild.com...
- Página 22 STEP 16 For Masonry, Concrete, or other wall materials: Consult your local hardware store for appropriate anchors to securely attach the safety bracket. IMPORTANT: THIS UNIT MUST BE SECURE TO THE WALL TO HELP PREVENT TIPOVER. FOLLOW THESE INSTRUCTIONS TO INSTALL THE ANTI-TIPPING SAFETY BRACKET PROVIDED WITH THIS PRODUCT.
- Página 23 STEP 17 (x2) #A89210 With the help of another person, attach the four doors as shown by screwing the screws from hinge plate into the side panels. Peel and stick bumpers (15) onto front edge of top shelf where top doors (G) meet.
- Página 24 STEP 18 Install the drawer as shown below. Follow adjustment details below to adjust drawer. Note: The drawer bracket holes are slotted. Drawer front can be adjusted by loosening screws, making needed adjustments and retightening screws. roller cabinet member drawer runner roller systembuild.com...
- Página 25 STEP 19 Door Adjustment To adjust the vertical height: Loosen the screws "A" on both hinges. They are usually in slotted holes which allows you to adjust up or down by a few mm. Then tighten back up. To adjust side to side: Loosen the screw "C"...
- Página 26 STEP 20 Using the shelf supports (5), place an adjustable shelf (F) behind each door area. (x8) #A80250 systembuild.com...
- Página 27 Maximum Loads This unit has been designed to support the maximum loads shown. Exceeding these load limits could cause sagging, instability, product collapse, and/or serious injury. 0 lbs 0 kg 35 lbs 15.8 kg 20 lbs 9.1 kg 35 lbs 15.8 kg 50 lbs 22.6 kg...
- Página 28 Register your product to receive the following: * New trend details - sneak peek on what's new * Surveys - have a voice within our community * Exclusive deals and discount codes * Quick and easy replacement part service To register your product, visit systembuild.com Visit your local retailer's website, rate your purchased product and leave us some feedback! We would like to extend a big "Thank You"...
- Página 29 Español Cubierta Delantera Este libro de instrucciones contiene información IMPORTANTE de seguridad. Por favor lea y manténgalo para referencia en el futuro. No Regrese este producto! Comuniquese con nuestro amistoso equipo de servicio al cliente para obtener ayuda. Llamenos al: 1-866-452-4081 (Gratis) Lunes - Viernes 9am - 5pm CST Visitar: www.systembuild.com PRECAUCION Este mueble puede volcarse y causar graves heridas y/o muerte.
- Página 30 Español Página 11 Desenrosque las dos mitades del pie. Fije la mitad inferior a la parte inferior (D) y atornille en la mitad superior. Página 12 Cerraduras de leva (1) en la superficie superior. Página 15 ¡IMPORTANTE! EL PANEL POSTERIOR ES UNA PARTE ESTRUCTURAL DE ESTA UNIDAD Y DEBE INSTALARSE DE MANERA ADECUADA.
- Página 31 Español OPCIÓN 1: Fijar en una viga en la pared (método preferido) Usando un detector de vigas, localice una viga en la pared. Coloque la unidad contra la pared con el soporte de seguridad alineado en esta ubicación. Para hacer el atornillado más fácil puede perforar un agujero piloto de 1/8"...
- Página 32 Español Página 27 CARGA MAXIMA Esta unidad ha sido diseñada para soportar la carga máxima anotada. El exceder estos límites puede causar inestabilidad, colapsarse y/o causar serias lesiones. ADVERTENCIA: Riesgo de lesiones a las personas - no coloque un televisor sobre muebles. Este mueble no está...
- Página 33 Français Couverture Avant CE LIVRET D'INSTRUCTION CONTIENT DES INFORMATIONS IMPORTANTES SUR LA SÉCURITÉ. VEUILLEZ LIRE ET GARDER POUR UNE RÉFÉRENCE FUTURE Ne retournez pas ce produit! Contactez notre équipe de service à la clientèle amicale d'abord pour obtenir de l'aide. Appelez-nous: 1-866-452-4081 (sans frais) du Lundi au Vendredi de 9h à...
- Página 34 Français Page 11 Dévissez les deux parties du pied. Fixez la moitié inférieure à la moitié inférieure (D) et vissez la moitié supérieure. Page 12 Serrures à cames (1) sur la surface supérieure. Page 15 IMPORTANT! LE PANNEAU ARRIÈRE EST UNE PARTIE STRUCTURELLE DE CET APPAREIL ET DOIT ÊTRE INSTALLÉ...
- Página 35 Français OPTION 1 : Fixation dans un poteau mural (méthode préférée) À l'aide d'un détecteur de montants, repérez un montant dans le mur. Placez votre appareil contre le mur, le support de sécurité étant aligné à cet endroit. Pour faciliter l'enfoncement de la vis, vous pouvez percer un trou pilote de 1/8'' de diamètre (3mm) à...
- Página 36 Français Page 27 CHARGES MAXIMALES Ce meuble a été conçu pour supporter les charges maximales indiquées. En excédant ces limites de charge, le meuble pourrait devenir instable, s'effondrer, et/ou causer des blessures graves. AVERTISSEMENT : Risque de blessure corporelle - ne pas placer une télévision sur ce meuble. Ce meuble n'est pas approuvé...