Resumen de contenidos para System Build 7446059COM
Página 1
7446059COM Tall Storage Cabinet B347446059COMT0 Date of Purchase ___ / ___ / ___ Lot Number: THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE. Do Not Return This Product! Contact our customer service team for help first.
Contact Us! Do NOT return this product! Contact our friendly customer service team first for help. Assembly Tips Call us! 1-866-452-4081 Monday-Friday 9am - 5pm CST Tube Visit systembuild.com to view the limited warranty valid in the U.S. and Canada. Helpful Hints PEOPLE NEEDED FOR ASSEMBLY: 1-2 ESTIMATED ASSEMBLY TIME: 1 HOUR...
Before You Start Read through each step carefully and follow the proper order Separate and count all your parts and hardware Give yourself enough room for the assembly process Have the following tools: Flat Head Screwdriver, #2 Phillips Head Screwdriver and Hammer Caution: If using a power drill or power screwdriver for screwing, please be aware to slow down and stop when screw is tight.
Página 4
Board Identification Not actual size Bottom Fixed Shelf 37446315030 37446316050 37446315040 Right Panel Left Panel 37446315020 37446315010 This piece is of paperboard construction. It is not made from wood, but is required for the assembly of your unit. Left Door Back Panel Right Door 37446315070...
Página 5
Board Identification Not actual size This piece is of paperboard construction. It is not made from wood, but is required for the assembly of your unit. systembuild.com Tube...
Part List Actual Size (x2) (x12) (x8) (x2) (x2) #A13410 #A11195 #A12100 #A11120 #A11210 5/8" pan head 7/16" pan head 1-3/4" flat head 1/2" pan head 3/4" pan head (x16) (x40) (x2) (x4) (x8) (x4) #A11600 #A21110 #A89020 #A23700 #A80250 #A24015 1-1/4"...
Página 7
Not Actual Size (x2) (x4) (x1) #A52995 #A43600 #A84050 handle adjustable leg safety bracket kit (x4) (x6) #A43610 #A65615 Separate hinge by loosening leg mount hinge screw as shown. systembuild.com Tube...
Página 8
STEP 1 Separate hinge by loosening screw as shown. (x6) #A65615 systembuild.com Tube...
Página 10
STEP 3 (x8) (x2) (x1) (x2) #A13410 #A89020 #A84050 #A11195 5/8" pan head bumper safety bracket kit Finished edges are facing upwards. systembuild.com Tube...
Página 11
STEP 4 IMPORTANT! THE BACK PANEL IS A STRUCTURAL PART OF THIS UNIT AND MUST BE INSTALLED PROPERLY. (x40) #A21110 Place the unit on its front as shown. Attached the back panel as shown nailing straight into the raw edges. Assure that the unit is square.
Página 12
STEP 5 (x4) (x4) (x16) (x4) #A24015 #A43610 #A11600 #A43600 leg mount Tap screw caps onto the screws. Attach the leg mounts to the bottom (D). Press the adjustable leg sleeve into the leg mounts as shown. sleeve Thread the adjustable leg onto the sleeve. adjustable leg systembuild.com Tube...
Página 13
STEP 6 Stand the unit upright and place against the wall. Fasten the wall anchor to the wall using option 1 or 2. Option 1: Securely screw into solid area of the wall as shown. (x1) Option 2: Drill a 3/16" diameter hole (5mm) in the wallboard. #A84050 Tap the wall anchor into the hole until it is flush.
Página 14
STEP 7 (x6) (x1) (x2) (x2) (x8) (x1) #A65615 #A55410 #A11120 #A11210 #A12100 #A55015 Attach base plates to each door using the 7/16" screws. Turn doors over and use two 3/4" screws to attach the latch to the Left Door (G). Attach the lock to the Right Door (H) using the 1/2"...
Página 15
STEP 8 (x8) #A80250 WARNING: Before continuing with the assembly of your unit, make sure that the cabinet is properly and securely fastened to the wall. If not, YOUR UNIT MAY TIP, causing possible bodily injury and also damage to your unit. systembuild.com Tube...
Página 16
STEP 9 (x4) #A23700 (x2) #A52995 To lock the doors: 1. Close the left door (G) first. Extend the barrel of the latch down into the hole in the bottom shelf. 2. Close the right door (H). Insert the key into the lock and turn. This will position the lock bar behind the left door.
Página 17
STEP 10 Loosen screw A Loosen screw C Loosen screw C Adjust door. Turn screw B to Adjust door. Tighten screw A move door. Tighten screw C Tighten screw C *side view systembuild.com Tube...
Página 18
Maximum Loads This unit has been designed to support the maximum loads shown. Exceeding these load limits could cause sagging, instability, product collapse, and/or serious injury. 0 lbs 0 kg 30 lbs 13.6 kg Warning: Risk of injury to persons - do not place a television on this furniture. This furniture is not approved for use with a television.
Página 19
Register your product to receive the following: * New trend details - sneak peek on what's new * Surveys - have a voice within our community * Exclusive deals and discount codes * Quick and easy replacement part service To register your product, visit systembuild.com Visit your local retailer's website, rate your purchased product and leave us some feedback! We would like to extend a big "Thank You"...
Página 20
Español Cubierta Delantera Este libro de instrucciones contiene información IMPORTANTE de seguridad. Por favor lea y manténgalo para referencia en el futuro. No Regrese este producto! Comuniquese con nuestro amistoso equipo de servicio al cliente para obtener ayuda. Llamenos al: 1-866-452-4081 (Gratis) Lunes - Viernes 9am - 5pm CST Visitar: www.systembuild.com PRECAUCION Este mueble puede volcarse y causar graves heridas y/o muerte.
Página 21
Español Pagina 5 Esta pieza es de cartón. No está hecha de madera; sin embargo, es necesaria para el montaje de su unidad. Página 7 Afloje el tornillo para separar la bisagra, tal como se muestra. Página 8 Afloje el tornillo para separar la bisagra, tal como se muestra. Página 9 Los bordes acabados quedan mirando hacia arriba.
Página 22
Español Página 14 Coloque la base en cada puerta con 7/16 "tornillos. Voltear puertas y utilizar dos 3/4 "tornillos para sujetar el pestillo a la puerta de la izquierda (G). Conecte la cerradura de puerta derecha (H), utilizando 1/2 "tornillos. Fijar las bisagras para cada puerta como se muestra.
Página 23
Español Página 19 Registre su producto para recibir lo siguiente: * Detalles de nuevas tendencias - Vistazo a lo nuevo * Encuestas - alec su voz entre su comunidad * Códigos de ofertas y descuentos exclusivos * Fácil y rápido servicio de partes de remplace Para registrar su producto, visite systembuild.com Clasificasión de 5 estrellas Visite el sitio web de su tienda local, califique su comprado...
Página 24
Français Avant de Commencer (page 3) -Lisez attentivement chaque étape et suivez le bon ordre -Séparez et comptez toutes vos pièces et matériaux -Donnez-vous suffisamment de place pour l'assemblage -Avoir les outils suivants: tournevis à tête plate, #2 tournevis Phillips, et Marteau -Attention: Si vous utilisez une perceuse électrique ou un tournevis électrique pour visser, veillez à...
Página 25
Français Page 12 Appliquez les bouchons à vis sur les vis. Attachez les pattes au fond (D) . Mettez par pression la douille réglable de la patte sur la monture de la patte comme illustré. Enfilez la patte réglable sur la douille. Page 13 Tenez le meuble verticalement et placez-le contre le mur.
Página 26
Français Page 18 CHARGES MAXIMALES cE MEUBLE A été conçu pour supporter les charges mazimales indiquées. En excédant ces limites de chage, le meuble pourrait devenir instable, s'effondrer, et'ou causer des blessures graves. AVERTISSEMENT: Risque de blessure corporelle - ne pas placer une télévision sur ce meuble. Ce meuble n'est pas approuvé...