Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
8129408COM
2 Door Wall Cabinet
Date of Purchase ___ / ___ / ___
Lot Number:
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Do Not Return This Product!
Contact our customer service team for help first.
Call: 1-866-452-4081 (toll free)
Monday-Friday 9am - 5pm CST
Visit: www.systembuild.com
WARNING
- Unit can tip over causing severe injury or death.
- Anchor unit to stud in wall (if instructed to).
- Do Not allow children to climb on unit.
- Put heavy items on lower shelves or drawers.
Easy
Assembly Difficulty Meter
For the latest information on SystemBuild products
follow us at Ameriwood Home
B348129408COM0
Tough
You
Tube
Manuales relacionados para System Build 8129408COM
Resumen de contenidos para System Build 8129408COM
- Página 1 8129408COM 2 Door Wall Cabinet B348129408COM0 Date of Purchase ___ / ___ / ___ Lot Number: THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE. Do Not Return This Product! Contact our customer service team for help first.
- Página 2 Contact Us! Do NOT return this product! Contact our friendly customer service team first for help. Assembly Tips Call us! 1-866-452-4081 Monday-Friday 9am - 5pm CST Tube Visit systembuild.com to view the limited warranty valid in the U.S. and Canada. Helpful Hints PEOPLE NEEDED FOR ASSEMBLY: 1-2 - Open your item in the area you plan to keep it to avoid excessive heavy lifting.
- Página 3 Before You Start Read through each step carefully and follow the proper order Separate and count all your parts and hardware Parts are labeled on the surface or edge of the part Give yourself enough room for the assembly process Have the following tools: Flat Head Screwdriver, #2 Phillips Head Screwdriver and Hammer Caution: If using a power drill or power screwdriver for screwing,...
- Página 4 Before You Start Please Note: You may need to lightly tap the wood dowels into the holes during your assembly process. systembuild.com Tube...
- Página 5 Board Identification Not actual size Left Panel Right Panel 38129408010 38129408020 38129408030 Cabinet Hanger Adjustable Shelf Bottom 38129000060 38129408050 38129408040 Wall Hanger Left Door Lower Rail 38129000080 38129408090 38129000070 Back Panel K812940800 Right Door This piece is paperboard construction. It is not made from wood, but is 38129408100 required for the assembly of your unit.
- Página 6 Board Identification Not actual size systembuild.com Tube...
- Página 7 Part List Actual Size (x8) (x8) (x7) (x8) (x22) #A22700 #A21670 #A23030 #A22710 #A12105 cam lock wood dowel confirmat screw cam bolt 7/16" screw (x4) (x2) (x4) #A13950 #A11210 #A80250 #8 X 3-1/2" screw 3/4" pan head screw shelf support (x3) (x4) (x1)
- Página 8 Part List Not actual size (x2) #A51010 handle (x4) #A65615 hinge (x2) #A92550 (x1) base plate kit #A55055 lock systembuild.com Tube...
- Página 9 STEP 1 (x4) systembuild.com Tube...
- Página 10 STEP 2 (x4) systembuild.com Tube...
- Página 11 STEP 3 Quick Assembly (x4) (x4) Proper orientation of CAM LOCK systembuild.com Tube...
- Página 12 STEP 4 (x4) (x4) Quick Assembly Proper orientation of CAM LOCK systembuild.com Tube...
- Página 13 STEP 5 systembuild.com Tube...
- Página 14 STEP 6 systembuild.com Tube...
- Página 15 STEP 7 finished surface systembuild.com Tube...
- Página 16 STEP 8 (x2) (x1) systembuild.com Tube...
- Página 17 STEP 9 (x4) finished edges face up systembuild.com Tube...
- Página 18 STEP 10 (x3) systembuild.com Tube...
- Página 19 STEP 11 (x20) (x2) systembuild.com Tube...
- Página 20 STEP 12 (x1) (x2) (x1) (x2) (x2) (x1) systembuild.com Tube...
- Página 21 STEP 13 (x1) (x2) (x1) (x2) systembuild.com Tube...
- Página 22 STEP 14 Insert the barrel of the lock (17a) into the hole as shown. With the teeth of the lock nut (17c) facing the door surface, tighten the lock nut (17c). Position lock bar (17b) and attached the barrel of the lock (17a) with the lock screw (17d).
- Página 23 STEP 15 When mounting the left door (I), be sure the slide bolt (11) is positioned in the up position. systembuild.com Tube...
- Página 24 STEP 16 (x2) Wall to be mounted to. With the assistance of another person, locate and mark the studs in the wall that the cabinet will be mounted to. Mark the location of the studs with a pencil. Position the wall hanger (H) on the wall and mark the locations of the studs on the back rail. Drill two 3/16" diameter holes in the wall hanger (I) at the stud locations.
- Página 25 STEP 14 (x4) After the assembled component is placed onto the wall hanger, mark the location of the studs on the back panel (K). Fastening the cabinet to the studs by driving screws (7) through the cabinet hanger (F) and lower rail (G) as shown. Wall to be mounted to.
- Página 26 STEP 15 (x4) finished edge to front systembuild.com Tube...
- Página 27 STEP 16 Door Adjustment To adjust the vertical height: Loosen the screws "A" on both hinges. They are usually in slotted holes which allows you to adjust up or down by a few mm. Then tighten back up. To adjust side to side: Loosen the screw "C"...
- Página 28 Maximum Loads This unit has been designed to support the maximum loads shown. Exceeding these load limits could cause sagging, instability, product collapse, and/or serious injury. 0 lbs 0.0 kg 30 lbs 13.6 kg 35 lbs 15.9 kg Warning: Risk of injury to persons - do not place a television on this furniture. This furniture is not approved for use with a television.
- Página 29 Register your product to receive the following: * New trend details - sneak peek on what's new * Surveys - have a voice within our community * Exclusive deals and discount codes * Quick and easy replacement part service To register your product, visit systembuild.com Visit your local retailer's website, rate your purchased product and leave us some feedback! We would like to extend a big "Thank You"...
- Página 30 Español Cubierta Delantera Este libro de instrucciones contiene información IMPORTANTE de seguridad. Por favor lea y manténgalo para referencia en el futuro. No Regrese este producto! Comuniquese con nuestro amistoso equipo de servicio al cliente para obtener ayuda. Llamenos al: 1-866-452-4081 (Gratis) Lunes - Viernes 9am - 5pm CST Visitar: www.systembuild.com PRECAUCION Este mueble puede volcarse y causar graves heridas y/o muerte.
- Página 31 Español Página 22 Introduzca el cilindro de la cerradura (17a) en el orificio como se muestra. Con los dientes de la tuerca de la cerradura (17c) orientados hacia la superficie de la puerta, apriete la tuerca de la cerradura (17c). Coloque la barra de la cerradura (17b) como se muestra y fíjela al cilindro de la cerradura (17a) con el tornillo de la cerradura (17d).
- Página 32 Español Página 27 Para ajustar la altura vertical: Afloje los tornillos "A" de ambas bisagras. Suelen estar en agujeros ranurados que le permiten ajustar hacia arriba o hacia abajo unos pocos mm. A continuación, vuelva a apretarlos. Para ajustar la profundidad: Afloje el tornillo "B"...
- Página 33 Français Couverture Avant CE LIVRET D'INSTRUCTION CONTIENT DES INFORMATIONS IMPORTANTES SUR LA SÉCURITÉ. VEUILLEZ LIRE ET GARDER POUR UNE RÉFÉRENCE FUTURE Ne retournez pas ce produit! Contactez notre équipe de service à la clientèle amicale d'abord pour obtenir de l'aide. Appelez-nous: 1-866-452-4081 (sans frais) du Lundi au Vendredi de 9h à...
- Página 34 Français Page 22 Insérez le barillet de la serrure (17a) dans le trou comme indiqué. En orientant les dents de l'écrou de verrouillage (17c) vers la surface de la porte, serrez l'écrou de verrouillage (17c). Positionnez la barre de verrouillage (17b) comme indiqué et fixez-la au barillet de la serrure (17a) avec la vis de verrouillage (17d).
- Página 35 Français Page 27 Pour ajuster la hauteur verticale : Desserrez les vis « A » sur les deux charnières. Ils sont généralement dans des trous oblongs ce qui vous permet de les ajuster vers le haut ou vers le bas de quelques mm. Puis resserrez-les. Pour ajuster d'un côté...