Handset
Charging the batteries
¤
Charge the batteries fully prior to first use in the
charging cradle/base.
The batteries are fully charged when the power
icon
disappears from the display.
Batteries may heat up during charging. This is not dangerous.
After a time, the charge capacity of the battery will decrease for technical reasons.
Handsets contained in the package have already been registered to the base. In the
event that a handset is not registered however, (indicated by Please register handset),
register the handset manually (
Setting the language
Display language
When using the device for the first time, you are prompted in English for the language required
for the display.
¤
. . . Use
to select the language required
Language for voice prompting and default answer machine announce-
ment
The default setting is English
¤
Menu
(
= English;
Setting the date and time
Set the date/time so that the correct date and time can be assigned to incoming calls, and so that
you can use the alarm.
¤
Press the display key below the display Time. The entry field will open.
¤
use
to enter the month, day and year in 8-digit format,
e. g.
To correct errors: Press left or right on the control key
¤
Enter the hours and minutes in 4-digit format using the keypad, e.g.
07:15. Switch between the fields using the control key, if necessary.
The display shows Saved. You will hear a confirmation tone.
To revert to idle status:
12
page 42).
= French;
= Spanish)
Press and hold the End call key
Availability and operation of the functions
may differ on your telephone.
OK
Enter the digit for the desired language
OK
for April 1st 2018.
in order to swap between fields.
.
OK
OK
en fr es
for