Idiomas disponibles
Idiomas disponibles
release the furniture tool to clean soft surfaces and textiles (curtains, upholstery). [11]
-
Dusting Brush: Press the latches on both sides of the handle and slide
downwards,then push the slider to the end to release the built-in dusting brush.
Ideal for hard surfaces (bookshelves, keyboards, skirting boards). [11]
Advanced Comfort Handle*:
-
Suction Regulator : Adjust the suction power by opening or closing the air valve on
the handle. [12]
Integrated accessories on the handle :
-
Built-in Crevice Tool : The hose handle end can be used as a crevice tool to reach
narrow spaces.
-
Furniture Tool : Press the latches on both sides of the handle and slide downwards to
release the furniture tool to clean soft surfaces and textiles (curtains, upholstery). [11]
-
Dusting Brush : Press the latches on both sides of the and slide downwards then
push the slider to the end to release the built-in dusting brush. Ideal for hard surfaces
(bookshelves, keyboards, skirting boards). [11]
Essential Handle*:
-
Suction Regulator : Adjust the suction power by opening or closing the air valve on
the handle. [12]
-
Built-in Crevice Tool : The hose handle end can be used as a crevice tool to reach
narrow spaces.
Switch off at the end of use by pressing the On/Off Pedal or On/Off Button on the hose
handle*. Unplug and rewind the power cord by pressing the cord rewind pedal.
Parking and Storage Section
The tube can be parked on back of the cleaner for storage or temporary storage while in
use. [13]
ACCESSORIES
To obtain the best performance and efficiency it is recommended that the correct nozzles
are used for the main cleaning operations. These nozzles are indicated in the diagrams by
the letters GP, HF or CA.
A nozzle type GP can be used to clean both carpet and hard floor.
A nozzle type HF is suitable for use only on hard floor.
A nozzle of type CA is suitable for use only on carpet.
The other nozzles are accessories for specialist cleaning tasks and are recommended for
occasional use only.
All accessories can be fitted to the end of the handle or the end of the telescopic tube.
Dual Action Pet Hair Remover Nozzle* - Use the mini turbo nozzle on stairs or for deep
cleaning on textile surfaces and other hard to clean areas. Particularly suitable for pet hairs
removal. [X]
Dual Action Allergen Remover Nozzle*– Use the mini turbo nozzle on stairs or for deep
cleaning on textile surfaces and other hard to clean areas, particularly suitable for allergen
removal. [Y]
*Certain Models Only
** May vary according to models
Parquet Extra Care and Parquet Care nozzles* – For parquet floors and other delicate
floors. [Z(30cm) , AA(25cm)]
Long 2In1 Tool* – Crevice tool and dusting brush - It allows to clean hard-to-reach areas
such as bookshelves and high corners. [AB]
XL Furniture Nozzle* - Ideal to clean large and soft surfaces such as sofas, mattresses
and couches. [AC]
IMPORTANT: Do not use mini turbo nozzles on rugs with long fringes, animal hides and
carpet pile deeper than 15mm. Do not keep the nozzle stationary while brush is rotating.
CLEANER MAINTENANCE
Emptying the Dust Bin
When the dust reaches the max level indicator in the bin, empty the dust bin.
IMPORTANT: To maintain optimum performance do not allow the dust above the max level
indicator.
1. Turn off the cleaner with the main switch and unplug the power cable.
2. Press the dust bin release button and remove the dust bin assembly from the
cleaner. [14]
3. Hold the dust bin with one hand and press the dust bin flap release trigger. [17]
4. Close the dust bin flap and refit to the cleaner main body. [14]
Cleaning the washable filters
The cleaner is fitted with pre-motor filter and exhaust filter. To maintain optimum cleaning
performance, regularly remove the filters and tap against the side of the waste container
to release dust. The filters should be washed every 5 dust container empties or when the
filter has excessive dust level.
IMPORTANT: All bagless cleaners require regular filter cleaning. Failure to clean your
filters may result in air blockage, overheating and product failure. This may invalidate your
guarantee.
IMPORTANT: Regularly check and maintain the filters.
IMPORTANT: Always ensure the filter pack is fully dry before use.
To access the filter:
1. Press the dust bin release button and remove the dust bin assembly from the cleaner.
[14]
2. Hold the dust bin with one hand and with the other hand press the dust bin lid release
button to open the bin lid. [15]
3. Remove the pre-motor filter located in the bin lid. [18]
4. Gently tap and wash the pre-motor filter. Do not use hot water or detergents. Remove
excess water from the filter and leave to dry fully before re-using. [21,22]
5. Reassemble the pre-motor filter to the dust bin lid once fully dry and refit to the cleaner.
IMPORTANT: Do not use the product without the filter pack fitted.
To access the exhaust filter:
1.
Unlock the exhaust filter door by pressing two buttons and pulling outward from main
cleaner. [19]
2.
Remove the filter pack from recess by pulling the ring-pull of exhaust filter. [20]
3
GB
