Idiomas disponibles
Idiomas disponibles
Emptying the Drum
1. To remove the lid to empty contents of
the dust drum, simply lift the two drum
latches on the side of the Vac and lift
the power head up and off the dust
drum and set to the side. Be sure to
unplug the vacuum before removing lid.
2. Set the power head on a clean dry area
while emptying the drum or changing
the Filter.
3. Dump the drum contents into the proper
waste disposal container.
Blowing Feature
Your Wet/Dry Vac has the capability to be
used as a blower for yard work, patio
cleanup and workshop applications to
blow sawdust and other debris.
WARNING: Always wear safety
eyewear complying with ANSI Z87.1
(or in Canada, CSA Z94.3) before
using as a Blower.
WARNING: To reduce the risk of
injury to bystanders, keep them
clear of blowing debris.
OPERATION (continued)
Power
Head
Dust
Drum
Drum
Latch
CAUTION: Wear a dust mask if
blowing creates dust which might
be inhaled.
CAUTION: To reduce the risk of
hearing damage, wear ear protectors
when using the Vac/Blower for
extended hours or when using in a
noisy area.
Muffler/Diffuser
Insert the locking end of the Muffler/
Diffuser into the blowing port of the Vac.
The Muffler/Diffuser should lock into
place.
The Muffler/Diffuser suppresses motor
noise and diffuses the exhaust air and
can be used while vacuuming indoors
and outdoors.
Muffler/
Diffuser
Locking
End
Muffler/
Diffuser
8
Vac
Blowing
Port
