Idiomas disponibles
Idiomas disponibles
ZB
Wc
Fig. 8a
8. Turn the unit upright and install the bottom drawer. Make sure the Knob (Wc) is loose enough to
allow the Drawer Face (F) to move freely on the Drawer False Front (J). Center the Large Drawer
Face (F) side-to-side on the Large Drawer False Front (J). And using the Spacer (ZB), position it
1/8" above the top of the Base (O). See Figures 8a and 8b. Tighten the Knob (Wc) to help eliminate
any shifting of the Face. Insert four #8 x 7/8" Black LoProfile Screws (Xd) through the holes in the
Drawer False Front (J) and fasten securely. See Figure 8b.
Working your way up, repeat the above steps with each drawer. There should be a 1/8" gap between
each drawer for the drawer slides to properly function.
Page 8 — 582Wd — 03/14
F
O
J
Xd
Fig. 8b
Xd
