Whittier Wood 589Wb Instrucciones Para Armar

Palmer aparador y centro de esparcimiento (para tv y equipo de audio y video)

Enlaces rápidos

Model #
589Wb
Palmer
Wardrobe/
Media Center
Assembly Instructions
Congratulations!
This fine piece of furniture will make a handsome
addition to your home. For the best results, start by
reading both the Assembly Instructions and
Finishing Hints before you begin your project.
For normal household use only.
recommended for commercial use.
Do not climb, sit or stand on this piece of
furniture.
Unload items from this unit prior to moving.
Do not overload the drawers on this unit.
For maximum stability, attach unit to the wall using
the enclosed hardware as per instructions.
P.O. Box 2827
Eugene, OR 97402 USA
Service Policy:
which are defective, missing or damaged
during assembly. Please contact Whittier
Wood Products customer service department
directly (by phone, fax, mail or email) for
replacement parts.
Hours:
Our friendly customer service staff
can be reached Monday-Friday 7:00 a.m. to
5:00 p.m. (Pacific Time). A message can be
left 24 hours a day, 7 days a week.
To Order:
Provide the complete furniture
model number (upper left corner of this
page), part letter, production code, quantity
needed, reason for replacement and your full
name and address along with a telephone
number in case we need to contact you.
Parts ship from our Eugene, Oregon factory
within 1 or 2 business days from the time
we receive the request. Please allow 5-10
business days for delivery.
Outside U.S. or Canada: 541-687-0213
Fax: 541-687-2060 • www.whittierwood.com
Mail: P.O. Box 2827 • Eugene, Oregon 97402, U.S.A.
Read both the Assembly Instructions and Finishing
Hints completely before beginning.
Store the parts: 1) in their box; 2) in a dry place; 3) in
temperatures ranging from 40° to 90°. (Not on a cold,
possibly damp, cement floor.)
Inspect your furniture periodically for any loose glue
joints or screws, or any other problem which may
be affecting the stability of your furniture. Tighten or
repair as needed.
Production Code:
We will replace any parts
Rev. 9/07
Tabla de contenido
loading

Resumen de contenidos para Whittier Wood 589Wb

  • Página 1 Model # 589Wb Palmer Wardrobe/ Service Policy: We will replace any parts which are defective, missing or damaged Media Center during assembly. Please contact Whittier Wood Products customer service department Assembly Instructions directly (by phone, fax, mail or email) for replacement parts.
  • Página 2 589Wb Palmer Wardrobe/Media Center — Parts List BEFORE BEGINNING ASSEMBLY: Check that the quantities of the parts received match those on the parts list below. EDGE BANDING BANDE DE BORD BORDE G — Top Assembly— Qty. 1 H — Back — Qty. 1 Ab —...
  • Página 3 589Wb Palmer Wardrobe/Media Center — Parts List (cont.) EDGE BANDING BANDE DE BORD BORDE Sb — Lower Adjustable Shelf — Qty. 1 EDGE BANDING N — Drawer Slides — Qty. 2 sets BANDE DE BORD BORDE BOTTOM VUEW VUE DU FOND VISTA INFERIOR Sc —...
  • Página 4: Special Instructions

    589Wb Palmer Wardrobe/Media Center — Parts List (cont.) ZC — Spacer — Qty. 1 ZP — #8 x 1" Pan Head ZU — #6 x 5/8" Screw — Qty. 9 Philtruss Screw — Qty. 27 ZK — Shelf Bracket ZE — #8 x 1¾" Pan —...
  • Página 5: Tools Required

    Install Cam Connectors (L) in the pre-drilled holes in the following pieces: Two in the Left Side (Ab) Two in the Right Side (Bb) Rev. 9/07 — 589Wb — Page 5...
  • Página 6 " Black Screw (V). See FIGURE 3. Attach the Magnetic Catch (X) to the bottom edge of the Crown centered side to side and fl ush with the front edge. Use the pan head screws contained in the package. Page 6 — 589Wb — Rev. 9/07...
  • Página 7 Slide the Base (I) under the lower end of the sides until it is fl ush with the bottom. Fasten in place with four #8 x 1¼" Black Screws (U) through the holes in the front Sleeper (C). See FIGURE 5C. Rev. 9/07 — 589Wb — Page 7...
  • Página 8 7) Attach the Hinges (W) to the Doors (J) with #6 x 5/8" Undercut (type 17) Screws (Z). The outermost hole in the hinge must go over the pre-punched hole in the door. Attach the Knob (ZX) using the #8 x 1" Machine Screw (ZF). Page 8 — 589Wb — Rev. 9/07...
  • Página 9 If some adjustment is necessary, loosen the screws and move the doors. See FIGURE 8A. Attach the Magnetic Catch Plates (X) to the upper inside corner of the doors where they will make contact with the magnetic catch. See FIGURE 8B. Rev. 9/07 — 589Wb — Page 9...
  • Página 10 fl ush with drawer side. Attach the slides with three #6 x 5/8" Undercut Screws (Z). The slides will not reach the back of the drawer. See FIG- URE 10. Page 10 — 589Wb — Rev. 9/07...
  • Página 11 If necessary, adjust the hinges on the doors so that they line up with the drawers. Insert the remain- ing Screws (Z) in the round holes in the hinges at this time. Rev. 9/07 — 589Wb — Page 11...
  • Página 12 Restraint (ZI). Carefully follow the instructions contained on the package. 16) After moving the unit to its location, some adjustment of the glides may be necessary to align the unit because of unevenness of fl oors and carpeting. Page 12 — 589Wb — Rev. 9/07...
  • Página 13: Palmer Aparador Y Centro De Esparcimiento

    589Wb Palmer Aparador y Centro de esparcimiento Normas para obtener servicio: Reemplaza- (para TV y equipo de remos las piezas que tengan defectos, falten o se dañen durante el armado. Sírvase comunicarse con audio y video) el departamento de servicio al cliente de Whittier Wood Products directamente (por teléfono, fax,...
  • Página 14: 589Wb Palmer Aparador Y Centro De Esparcimiento

    589Wb Palmer Aparador y Centro de esparcimiento LISTA DE PIEZAS Antes de comenzar el montaje, verifi que que el total de piezas recibidas concuerde con la cantidad indicada en la lista que fi gura a continuación. Cantidad Cantidad Cantidad Ab Lado izquierdo ....1 O Frente del cajón .
  • Página 15 ANTES DE PROSEGUIR, LEA LAS Coloque la parte superior (G) sobre los lados (Ab y Bb) INSTRUCCIONES PARA EL FUNCIONAMIENTO y sujete insertando tres tornillos negros #8 x 1 " (V) DEL SISTEMA DE SUJECIÓN DE CONECTORES dentro de los tres orifi cios que se encuentran en la parte DE LEVA EN LA HOJA ADJUNTA.
  • Página 16 LoProfi le #8 x 7/8" (ZH) a través de los orifi cios que alfombras. se encuentran en el frente falso del cajón (P) y apriete fi rmemente. Vea la FIGURA 12B. PAGE 4 – 589Wb SP...
  • Página 17 Centre de médias les pièces défectueuses, manquantes ou endom- magées pendant le montage. Veuillez contacter Instructions de Montage directement le service clientèle de Whittier Wood Products (par téléphone, fax, courrier ou e-mail) pour obtenir les pièces de remplacement. Horaires : Le personnel accueillant de notre service clientèle est joignable du lundi au vendredi, de 7 h à...
  • Página 18: Nomenclature Des Pièces

    589Wb Palmer Armoire et Centre de médias Nomenclature des pièces AVANT DE COMMENCER L’ASSEMBLAGE, vérifi ez si la quantité des pièces reçues correspond à la liste ci-dessous. Qté Qté Qté Ab Côté gauche ....1 N 3 –...
  • Página 19 à l’aide des vis undercut (type 17) n° 6 x 5/8 po (Z). 8 x 1 po (V) dans les trois trous du dessus, puis serrez- Les trous préforés des côtés montrent l’emplacement les bien. Voir la FIGURE 4. PAGE 3 – 589Wb FR...
  • Página 20 Voir la FIGURE 12B. moquette. Répétez les étapes ci-dessus pour l’autre tiroir. Il doit y avoir un espace de 0,31 cm (1/8 po) entre les tiroirs pour que les glissières puissent fonctionner correcte- ment. PAGE 4 – 589Wb FR...

Tabla de contenido