Idiomas disponibles
Idiomas disponibles
The LED then displays the selected ampere
value in solid green.
The JUICE BOOSTER 2 saves the last charge intensity
setting used with a particular mains adapter, and that set-
ting is restored after any power interruption or when the
device is plugged in again with the same adapter.
Changing the operating mode (MODE)
Press and hold down the SELECT button for approx. 5
·
seconds (before plugging the vehicle-end connector
into the vehicle charging socket, or within 30 seconds
after plugging it in).
All LEDs will briefly flash yellow, after which
the currently set operating mode will flash
yellow in rapid sequence, thereby signalling
that it's ready to change the operating mode.
Set the desired operating mode by pressing the SELECT
·
button repeatedly until the desired mode is reached.
The selected setting will be saved automatically
after approx. 5 seconds. The selected operating
mode is then displayed in slowly flashing yellow.
STANDARD mode
For operation in all countries except the UK, France and
Norway.
UK/FR mode
This mode must be selected for charging in the United
Kingdom and France (as it limits the Schuko plug to 10 A or
8 A / 14 A for GreenUp).
NORWAY mode
This mode, and only this mode, must be selected for charg-
ing in Norway (configures the device for use in earth-free
IT networks).
⚠ D A N G E R
EARTH OFF mode
Disables the device's internal earth conductor check. This
mode may only be used once you have checked to verify
that the electrical installation and earthing have been
correctly connected.
Unbalanced loads and other inadequacies in the grid
can result in the earth conductor check detecting an
irregularity with the earthing despite it being correctly
connected. For technical reasons, this circumstance can-
not be resolved in any other way. This situation has been
repeatedly observed in Italy, among other places. For your
User Manual JUICE BOOSTER 2 [JTJB2-EU2R*] V 3.2
safety, reset the operating mode to STANDARD
once you are charging from a different socket.
Charging your vehicle at public
charging stations
1 Select the fitting adapter (Type 2 or Type 3).
2 Connect the JUICE CONNECTOR of the JUICE
BOOSTER 2 to the JUICE CONNECTOR of the adapter,
as described above.
3 Plug the connected adapter into the charging station.
4 Couple the vehicle-end connector of the JUICE
BOOSTER 2 to the vehicle's charging socket.
5 Release the charging process at the charging station, or
pay, as needed.
6 The charging process begins automatically.
The sequential flashing orange LEDs indicate
that charging is in progress.
Stopping the charging process
1 Stop the charging process at the controls inside the
vehicle.
2 This releases the lock on vehicle's charging coupling.
If you are charging the vehicle at a charging station, the
lock at the charging station is likewise released.
3 First disconnect the connector coupled to the vehicle,
then unplug the connector plug from the power socket or
the charging station.
Maintenance and cleaning
Cleaning
Disconnect the JUICE BOOSTER 2 from the power
·
socket and the vehicle.
Only clean the outside of the device. Use a soft, slightly
·
damp or antistatic cloth.
Do not use any detergents or chemical agents to clean
·
the device.
Maintenance
The device basically requires no maintenance.
Note that connectors and couplings are sensitive,
high-performance parts, and their contacts must always
23
