Tabla de contenido
Idiomas disponibles
Idiomas disponibles
a
Quick start guide
Smart Stand Fan
For more information see the extended manual online:
ned.is/ fnst17cwt40w
Intended use
The product FNST17CWT40W is a stand fan with three different
speeds, a swing function and a timer.
The product FNST17CWT40W can be controlled using the buttons
on the product, the remote control, or through the Nedis SmartLife
App.
This product is exclusively intended as a fan for indoor use only.
The product is not intended for professional use.
This product is intended for use in household environments for
typical housekeeping functions that may also be used by non-expert
users for typical housekeeping functions, such as: shops, offices
other similar working environments, farm houses, by clients in
hotels, motels and other residential type environments and/or in
bed and breakfast type environments.
Any modification of the product may have consequences for safety,
warranty and proper functioning.
Main parts (image A)
Front grill
1
2
Latches
Fan blade
3
Fan head
4
5
Control panel
6
Height adjustment lock
Power plug
7
Locking screw
8
9
Fan blade nut
q
Telescopic stand
Control panel (image B)
1
Sleep mode indicator
Swing indicator
2
Nature mode indicator
3
4
Wi-Fi indicator
5
Off button
Timer button
6
Remote control (image C)
1
Mode button
Timer button
2
On / Speed button
3
Safety instructions
-
WARNING
• Ensure you have fully read and understood the instructions in
this document before you install or use the product. Keep the
packaging and this document for future reference.
• Only use the product as described in this document.
• Do not use the product if a part is damaged or defective. Replace
a damaged or defective product immediately.
• Children and persons with reduced physical, sensory, or mental
capabilities or lack of experience may not use the product
without supervision.
• Switch off and unplug the product when not in use or before
maintenance.
• Do not unplug the product by pulling on the cable. Always grasp
the plug and pull.
• Keep hair, loose clothing, fingers and all body parts away from
openings and moving parts.
• Do not operate the product in the presence of explosive fumes.
FNST17CWT40W
Rear grill mounting nut
w
e
Rear grill
Base
r
L- shaped screw
t
y
Remote control
u
Battery compartment
Spacer
i
Battery cover
o
p
Nut
a
Bolt
7
Speed indicator
Timer indicator
8
Fan speed indicator
9
q
On / Speed button
w
Swing button
4
Off button
Swing button
5
• This product may only be serviced by a qualified technician for
maintenance to reduce the risk of electric shock.
• Only use the product if the polarised plug fits properly into a
polarised outlet. If the plug does not fit, reverse the plug and try
again. If it still does not fit, contact a qualified electrician.
• Do not let water enter the product.
• Do not dismantle, open or shred secondary cells or batteries.
• Do not expose cells or batteries to heat or fire. Avoid storage in
direct sunlight.
• In the event of a cell leaking, do not allow the liquid to come in
contact with the skin or eyes. If contact has been made, wash the
affected area with copious amounts of water and seek medical
advice.
• Only use the battery type(s) recommended in this document.
• Make sure to match the (+) and (-) polarity markings.
• Dispose of the cell or battery properly.
• Use only the cell or battery in the application for which it was
intended.
Placing the batteries (image D)
1. Open the battery compartment A
2. Place 2 size AAA batteries (not included) into the battery
compartment A
u
.
Observe the plus (+) and minus (–) marks on the cell, battery and
4
equipment and ensure correct use.
3. Close the battery compartment A
Installing the product (image E - H)
1. Secure the telescopic stand A
shaped screw A
and the spacer A
t
2. Adjust the telescopic stand A
3. Tighten the height adjustment lock A
4. Place the fan head A
4
5. Make sure to tighten the locking screw A
6. Place the slots of the rear grill A
the fan head A
4
.
7. Secure the rear grill A
e
-
Make sure to tighten the rear grill mounting nut A
8. Secure the fan blade A
-
Make sure to tighten the fan blade nut A
9. Align the front grill A
1
10. Close the five latches A
11. Secure the front grill A
and nut A
p
.
Installing the Nedis SmartLife app
1. Download the Nedis Smartlife app for Android or iOS on your
phone via Google Play or the Apple App Store.
2. Open the Nedis Smartlife app on your phone.
3. Create an account with your e-mail address and tap Continue.
4. You will receive a verification code on your e-mail address.
5. Enter the received verification code.
6. Create a password and tap Done.
7. Tap Add Home to create a SmartLife Home.
8. Set your location, choose the rooms you want to connect with
and tap Done.
Adding the product to the Nedis SmartLife app
1. Switch on the product.
2. Press and hold the swing button B
The Wi-Fi indicator B
4
w
indicate pairing mode is active.
3. Tap + in the Nedis SmartLife app.
4. Select the device type you want to add from the list.
5. After confirming you can control the product with your
smartphone.
8
u
.
with the battery cover A
u
to the base A
q
r
using the L
i
.
q
to the desired height.
6
.
onto the telescopic stand A
q
8
.
on the positioning knobs of
e
using the rear grill mounting nut A
w
using the rear fan blade nut A
3
9
.
with the rear grill A
e
.
2
.
to the rear grill A
with the bolt A
1
e
w
for 5 seconds.
blinks quickly and a beep sounds to
o
.
.
w
.
.
.
9
a
Tabla de contenido
