Cameo S2 IP Manual De Usuario página 24

Settings
W-DMX
=
Settings
Rotate
=
display
Display
=
Lighting
Operational
status with
=
DMX signal
fault
Dimmer
=
curve
= Dimmoven
24
On
WDMX State
Off
Receive W-DMX mode: Receiver
Operating
Mode
Transmit W-DMX mode: Transmitter
G3
Transmitting
Mode
G4s
Link
Link
Unlink
No
Receive
Reset Yes
Off No display rotation
Display is rotated by 180° (e.g. for overhead installa-
On
tion)
Always On On permanently
Deactivates after approximately 20 seconds of inactivity
Off after 20s
Hold Last command is retained
Blackout Activates blackout
User Colour 8 Enables User Colour 8
Fade Out
10s fade to blackout
10s
Full On All LEDs at maximum brightness
Linear Light intensity increases linearly with DMX value
Light intensity can be finely adjusted at lower DMX
Exponential
values and broadly adjusted at higher DMX values
Light intensity can be broadly adjusted at lower DMX
Logarithmic
values and finely adjusted at higher DMX values
Light intensity can be finely adjusted at lower and
S-curve higher DMX values and broadly adjusted at medium
DMX values
LED Light responds abruptly to changes in DMX value
Light behaves like a halogen spotlight with slight
Halogen
brightness changes
Activate W-DMX
W-DMX deactivated
G3 transmission standard
G4s transmission standard
Pair with W-DMX devices. W-DMX must be
enabled on all devices, and the pairing with a
transmitter be retained (Receive Reset).
Unpair all devices
Cancel operation
Terminate the connection to all paired W-DMX
transmitters and set them to pairing standby