Charging The Internal Battery - Silvercrest SLB 10 A1 Instrucciones De Uso

Charging the internal battery

CAUTION
► Charge the speaker only in dry interior rooms.
► Due to the high power consumption, the speaker must be charged
using a USB mains adapter. Do not charge the speaker from the USB
port of a PC or notebook.
► Use only USB mains adapters with an output voltage of 5 V and an
output current of at least 900 mA to charge the speaker.
Use only the supplied charging cable e to charge the speaker!
►
Always disconnect the charging cable e when charging is complete!
►
Before using the speaker, the integrated battery must be completely charged.
Open the protective cover 0.
♦
Connect the USB type-A connector of the charger cable e to a suitable
♦
USB mains adapter (not supplied).
Connect the micro-USB plug of the charging cable e to the micro-USB
♦
charging port q on the speaker.
When charging is complete, remove the charging cable e from the
♦
speaker and close the protective cover 0.
SLB 10 A1
GB │ MT │ 85 ■