Idiomas disponibles
Idiomas disponibles
Operation
Figure 18
WARNING: This electric firebox
must be properly installed before
it is used.
The unit can be controlled by
either the manual controls which
are located on the upper right of
the fireplace or the remote (Figure
18 & 19).
The fireplace is supplied with an IR
multifunction remote control.
! NOTE: To operate correctly, the
remote control must be pointed
towards the Floating Display
A.
Standby
Figure 19
A
B
D
F
Turns the unit On and Off.
→ Activated by pressing the
Standby button on the remote
or the unit.
• The unit will turn on with the
same functions that it was set
to when it was turned Off and
the intake temperature will be
indicated on the On Screen
Display.
! NOTE: When any button is
pressed the intake temperature
.
TM
will be displayed on the On Screen
Display for 5 seconds.
B.
Turns the flame effect On and Off.
→ Activated by pressing the
C
button on the remote.
E
C.
Cycles the unit sequentially through
G
the 2 settings: High Heat and Off.
H
→ Activated by pressing the
button on the unit or the remote.
• Indicated by the
A C D E F
Flame Effects
Heat ON/OFF
Floating
Display
TM
icon and
15
