Urmet DS1092-183 Manual De Instrucciones página 20

INSTALLATION
1 Make sure that no units are powered before starting the installation procedure.
2 Install the camera on the bracket and fasten it.
3 Position the bracket to frame the required picture and fasten it to the wall or other flat surface.
4 Connect the video output to the utility.
5 Power the camera.
6 Adjust the lens to frame the required images.
Remove the camera top.
•
Loosen the protective dome.
•
Turn towards WIDE "W" to move the subject away (the frame and angle become consequently
•
wider).
Turn towards TELE "T" to move the subject closer (the frame and angle become consequently
•
narrower).
Turn towards NEAR "N" to adjust focus of nearby subjects.
•
Turn towards FAR "∞" to adjust focus of faraway subjects.
•
Focus adjustment ring
VARIFOCAL adjustment ring
20
Blind spot covered
by LEDs
Focus adjustment ring lock
pin
VARIFOCAL adjustment ring
lock pin
DS1092-183