Idiomas disponibles
Idiomas disponibles
ACCESSORIES PROVIDED
No.1 Camera with bracket for wall mounting.
•
No.1 allen wrenches
•
Instruction manual.
•
Important note:
Accessories may be changed without prior notice.
INSTALLATION SPECIFICATIONS
Avoid pointing the lens directly towards the sun or intense sources of light also when the camera is
•
off. The subject must not be backlit.
Some lighting systems (e.g. coloured fluorescent lights) may false the colours.
•
Arrange a suitable circuit breaker and fuse upstream of the devices.
•
Make sure that the rating plate data correspond to the power specifications before connecting the
•
device to the mains.
INSTALLATION PRECAUTIONS
Though the device has an IP66 protection grade, there are particular environments (such as
•
seashores, harbours, wharves, etc.) that can accelerate corrosion of external parts. Also installation in
very dusty environments (quarries, mines, dusty materials, etc.) can compromise the optimal
operation.
To prevent device overheating, place it in a well aired position.
•
For the same reason, the device must not be installed near heat sources as radiators or warm air
•
ducts, in places where it is directly exposed to sun irradiation or in rooms with excessive dust
accumulation, subject to mechanical vibrations or impacts.
Consider the device operating temperature range (-10° C÷+50° C) before choosing the place for
•
installation. Do not install the unit over another heating device.
Do not power the device on immediately after moving it from a cold place to a warm one and vice
•
versa. As a general rule, wait for three hours: the device needs this time to adapt to a new
environment (temperature, humidity, etc.).
DS 1092-183
19
