Mode Button; Changing The Measurement Mode; Wireless Communication; Button Hold - Sonel CMM-30 Manual De Uso

 To enable the mode press and hold PEAK
seconds.
 To disable the mode, press and hold PEAK
 This function is available only when measuring AC volt-
age and current.
 While PEAK is active, autoranging is disabled, therfore it
is advised to start the function after connecting test leads
to the measurement point. Running PEAK before that
may cause overrange symbols to appear.

6.5 MODE button

6.5.1 Changing the measurement mode.

Press shortly MODE
measurement modes.

6.5.2 Wireless communication

The multimeter is equipped with a wireless data transfer mode
for devices with installed Sonel Multimeter Mobile software. To
enable the mode, long press MODE
ible in the Bluetooth manager of any receiver device as CMM-30.
Details of cooperation with the mobile application are provided
in Sonel Multimeter Mobile manual.

6.6 Button HOLD

6.6.1 HOLD function

This function is used to 'freeze' the measurement result on the
display. To do this, shortly press HOLD
tion is enabled, the display shows symbol HOLD.
To return to the normal operation mode of the device, press
HOLD button again.
60
button to switch between the available
CMM-30 – USER MANUAL
button for approx. 3
button.
button. The meter will be vis-
button. When the func-