Idiomas disponibles
Idiomas disponibles
GENERAL SAFETY PRECAUTIONS
Read and observe the enclosed general safety precautions and this operating
manual before using power tools.
SAFETY PRECAUTIONS SPECIFIC TO ROTARY SANDERS
• Keep children and other persons away from your working area.
• Use screw clamps or similar clamping tools for holding the work pieces in place. This provides
a much more secure grip than is possible with your hands.
• Install an exhaust unit or a dust catching device.
• Keep the vent holes in the sanding disc clean.
• Before beginning work make sure there are no nails, screws, or similar metal objects in the
work piece, as they can tear the sanding paper and damage the sanding pad.
• The Rotary Sanders should only be connected to single-phase alternating current, and only
of the voltage indicated on the type plate. Since there is a double layer of insulation, it is also
possible to connect to outlets without protective contact.
• Make sure the Rotary Sander is switched off before connecting it to the mains.
• Do not put the Rotary Sander down until the sanding plate has come to a complete stop.
• Be sure to disconnect the plug from the mains when inserting or changing the sanding paper,
or while performing any other maintenance work.
• Always keep the power cable away from the operating range of the machine. Make sure the
cable always leads away from the machine.
• Store the appliance out of reach of children, and do not let anyone use it without instruction.
• The dust created from sanding can be noxious, flammable or explosive (e.g. lead-containing
paint, some types of wood and metal.) Take suitable protective measures for such sanding jobs.
INTENDED USE
The Rotary Sander is used for sanding surfaces on wood, plastic, or metal, with the appropriate
sanding material for each application.
WARNING: The Rotary Sander is not suitable for sanding wet surfaces!
Wear protective goggles and a dust mask for all dust-generating
work.
7
EN
