Care, Storage - Crivit GA-3130 Instrucciones De Uso

Assembly
Caution! We recommend that two peo-
ple perform the assembly. The product
is under spring tension.
When anchoring the stakes be sure to
do it on a suitable surface. Soft surfaces
such as moss or sand, for example,
should be avoided.
1. Remove all packaging materials and
carefully take the hitting net (1) out of the
storage bag (5). Make sure you have
enough space.
Each pole (3) consists of several parts that
are interconnected.
2. Spread the hitting net out on the ground,
bottom side down.
3. Connect the parts of the first pole (fig. B).
4. Slide the pole into the pole sleeve and thread
the pole crosswise on the upper part of the
hitting net through the marker with the
matching color (fig. B).
Tip: Take note of the color-coded pole sleeves.
5. Insert the ring hook (1b) on the hitting net
into the corresponding pole end (3a) (fig. C).
6. Repeat steps 3 to 6 with the second pole.
7. Put a stake (7) through each loop (1c).
8. Anchor the stake in the ground. The loops on
the hitting net should be taut (fig. C).
9. Unfold the target marker (2) and hold it
against the upper attachment (1d) on the
hitting net (1) (fig. D).
10. Loop the Velcro straps (2a) of the target
marker around the attachment (1d) and
fasten them tight.
11. Thread the attachment cord (2c) through the
eyelets (1f) on the hitting net and pull the
target marker tight.
12. Knot the attachment cord tightly to the
eyelet.
13. Fasten the lower Velcro straps (2b) of the
target marker to the lower loops (1e) on the
hitting net.
14. Insert the desired tee (8) (9), as shown in fig.
E, into the hole (4c) in the hitting mat (4).
Dismantling
Proceed as for assembly, but in reverse order.
Use of the hitting mat
The hitting mat has two different grass heights for
you to practice hitting from high grass (rough)
(4a) or low grass (fairway) (4b). It is suitable for
both right-handed and left-handed persons. The
tees are for hitting with different clubs.

Care, storage

To clean, use only water or soapy water, never
abrasive cleaning agents. When it is completely
clean and dry, place the product in the bag.
Store it at room temperature.
Disposal
Dispose of the product and the packaging
materials in accordance with current local regu-
lations. Packaging materials such as foil bags
are not suitable to be given to children. Keep the
packaging materials out of the reach of children.
Warranty
What does this warranty cover?
The warranty covers:
• Damage, breakage, or inoperability due to
defect.
• Damage not accounted by normal wear and
tear or following the safety and maintenance
instructions provided in the user manual.
What is not covered by the
warranty?
The warranty does not cover damage
caused by:
• Normal wear and tear of the product,
including fragile parts (such as switches, glass,
etc.);
• Improper use or transport;
• Disregarding safety and maintenance
instructions;
• Accidents or acts of nature (eg., lightening,
fire, water, etc.).
• Tampering with the product (such as removing
cover, unscrewing screws etc.)
US-EN
5