Sicam JUMBO TCS56 Manual Origina página 31

5. Operating instructions
Warning - tire or rim damage danger!
Excessive pressure can e. g. result in cracks
(on the inside/outside) of the tire. The rim
can be scratched or deformed.
€
Read the Wdk publications available in
German and English! (www.wdk.de: moun-
ting/demounting instructions – criteria
catalogue)
€
Inner temperature of the tire must be at
least 15 °C (only in case of RFT/UHP).
€
Read the Wdk publications available
in German and English! (www.wdk.de:
mounting/demounting instructions – tire
overheating)
€
Adjust pressure to the type of tire.
€
Use the plastic protections on the types of
rim that need it.
!
Before demounting or mounting operations it is ext-
remely important to collect all the rim and tire data.
In this way it will be possible to know in advance the
mounting, the pressure and the required accesso-
ries!
Sicam srl società unipersonale
Operating instructions | JUMBO TCS56 | 31
5.1 Turning on the JUMBO TCS56
Follow carefully the following procedures before
starting-up the JUMBO TCS56 and carrying out tire mounting
and demounting operations:
1. Connect the remote control to the electrical panel
with the special connection cable to activate auto-
matically the remote control;
2. Check that the remote control connection indicator
is steady (active).
3. Press the START button on the electrical control
panel.
i
If the remote control has not been previously activa-
ted the electrical panel does not remain on.
en
|
301 966 2010-11-18