Echo CS-590 Manual De Instrucciones página 14

Starting the warm engine
1. Chain brake ACTIVATED position
 Confirm there is fuel and chain oil in the tanks.
 Press hand guard forward.
(Chain brake ACTIVATED position)
 Lift ignition switch up.
 Press the decompression device.
 Securely hold the chain saw.
 Pull starter handle.
 Choke may be used if necessary, but after first firing sound pull throttle trigger a little to
release throttle latch and choke.
After choke control knob is pulled and then knob is returned to original position, throttle
remains a little open (latch condition).
Running
1. Chain brake RELEASED position
2. Throttle trigger lockout
3. Throttle trigger
 After engine starts, allow it to idle for a few minutes.
 Pull front hand guard towards the operator immediately.
(Chain brake RELEASED position)
 Squeeze throttle trigger gradually to increase engine revolution.
 The chain starts moving when the engine reaches 4000 r/min approximately.
 Ensure proper acceleration and lubrication of saw chain and guide bar.
 Do not run the engine at high speed unnecessarily.
 Be sure that saw chain stops moving when throttle trigger is released.
14